Aghhh, Ok. if anyones got one that they don't intend to fit let me know?

Yeah Jay, I'm surprised you made so many!! they are indeed a royal pain on the rear end to make, when I started doing these I thought I could make loads in one go, but after about 10 of them it started to become a chore!!

As for Scotchlocking them into the car loom, then that is one sure fire way to induce all sorts of problems.

As for making them again, well I may do BUT PLEASE dont hold your breath as you'll probably die before I get one out again.....!

com'mon kev, one for the road. just think of it as your swan song.

I'm after one to ;)

Whats a site supporter gotta do to get a kit? anyone buy one in haste they wanna pass on?

I want one as well.

They are just so fiddly to make, the components are one thing it's drilling the blanks and mounting the LEDs that bored me. I may do an idiots guide to making them but SO busy at the moment it's unreal.

Yeah a guide or even just the wiring diagram would be great. No problem sourcing the bits and making it.

Yeah if you could just list the components that would be great then I can get one of the sparkies at work to make it for me;) plenty of guides how to fit them so that should be no problem;)

I could make a few of these indicator kits if there's anyone interested.

The part's list is quite short:
- 4x 12v LEDs & mounting brackets (better off going with low power types, as you can't draw a lot current from the VIS circuit without causing problems)
- 4x 1N4007 diodes
- 1x 2k1 resistor
- some stripboard to mount the components on
- about 3-3.5 metres of 5 core cable to run into the engine bay