theMGZS.co.uk :: MG ZS forum - View Single Post

Jay-ZS+ · 17-07-10, 01:36 PM

It will only apply to those with the V6, as it gets wired into the loom that connects to the VIS motors on the plenum/inlet manifold.

Basically the VIS motors open at different points in the rev range allowing more air into the engine giving the full power of the engine.

The VIS indicator consists of 4 leds, 2 for each VIS motor that will be fitted to the blank on the dash just to the right/left of the steering wheel. As the actuator in the motors open it feeds a signal back changing the LEDs that light up.

In basic terms it allows you to know when the motors are open and you will be able to tell if they are faulty. As its often a cause of a low powered 180.

Will come with full fitting instructions for a plug and play fit.

17-07-10, 01:36 PM	#3
Jay-ZS+ Site Supporter Join Date: Aug 2008 Location: Bristol Posts: 6,835	It will only apply to those with the V6, as it gets wired into the loom that connects to the VIS motors on the plenum/inlet manifold. Basically the VIS motors open at different points in the rev range allowing more air into the engine giving the full power of the engine. The VIS indicator consists of 4 leds, 2 for each VIS motor that will be fitted to the blank on the dash just to the right/left of the steering wheel. As the actuator in the motors open it feeds a signal back changing the LEDs that light up. In basic terms it allows you to know when the motors are open and you will be able to tell if they are faulty. As its often a cause of a low powered 180. Will come with full fitting instructions for a plug and play fit. __________________ ------------------------------ ------------------------------ __________________ James 2012 BMW 320d Sport Last edited by Jay-ZS+; 17-07-10 at 01:43 PM.