180 track car project

[Noobrider]

After owning 2 Zs's, 2 ZR's a TF and an F, I have finally managed to get a 180 ZS. We already have a Pumesta track car from which we have learned a lot about preparation and requirements so have decided to go bigger and better with the 180.

It's an 03 plate Mk1 in Silver with 62k on the clock. It's taxed and tested until February. Only things wrong with it are it has had a very small bump on the rear that has been repaired and repainted, although not to the highest standard. A small crack on the front splitter and a small crack in the rear bumper. Also the front O/S CV joint is knackered and clicks like a typewriter.

Engine is very smooth and powerful and other than the clicky drive shaft it drives perfect. Drove it back 60 miles without a problem.

Someone has fitted 40 profile tyres on 3 wheels and left a 45 profile on one, it has a ZR stainless big bore back box and an open K & N in the engine bay....bless em they tried.

It has a rather nice JVC stereo and the interior isnt bad at all, the drivers seat bolster is still in one piece although there is a small cig burn in the seat bottom.

All this for the princely sum of £400.

Starting tomorrow, I will be stripping everything out to take it back to a bare shell and measuring up for the roll cage.

Will start posting pictures from tomorrow.