View Full Version : Fogs
millarcontracts
10-03-10, 08:50 PM
Hey First time new thread maker
Had a run in with rabbit at weekend
http://i724.photobucket.com/albums/ww246/MILLARCONTRACTS928/Photo002.jpg
Was just woundering is the bracket just clipped onto bumper or screwed??
any help would be great thanks
Screwed, in 4 places I believe!
The brackets are like hens teeth, so hopefully it's not damaged! :)
Stephen
10-03-10, 09:02 PM
It is little clips that go onto the bumper holding the fog light holder in place. i had mine off not that long ago when i put the fogs in mine. You may have lost the clips when you hit the rabbit, so you many need to get some from rimmers or xpart.
Stephen
millarcontracts
10-03-10, 09:05 PM
thanks for the replys quite inpressed at how quick reply wat these look like or are called tat i might have to get
i assume its a takein bumper off job
Stephen
10-03-10, 09:08 PM
You will need these http://www.rimmerbros.co.uk/Item--i-DYC101360
You may be able to put your hand down with the bonnet open, but id take the bumper off. 4 nuts when you open the bonnet, 4 underneath and 2 either side. Watch you dont unscrew the wing bolts instead as you may get mixed up and remember to disconnect the fog lights when you pull the bumper away.
Stephen
It is little clips that go onto the bumper holding the fog light holder in place.
Really? I had screws holding mine on :nugget:
Stephen
10-03-10, 09:15 PM
Me and Marcus both had the http://www.rimmerbros.co.uk/Item--i-DYC101360 clips on ours when we had the bumpers off. Are you talking about the Coloured caps that are screwed into the holder. if you remove them you can fit the fogs?
I deffo had screws holding the bracket onto the bumper.. How odd!
I did however only look at the passenger side when I replaced the fog with a mk1 jobby, maybe a cheap accident repair?
millarcontracts
10-03-10, 09:30 PM
aww ******
mark 2 has screws for the blanks, or that hold the fog onto the bracket, then wee clips that hold the actual bracket to the bumper, theyll probably bee sat on the undertray still
millarcontracts
10-03-10, 09:35 PM
thanks for your quick replys
I soo want a car lift
scottforsyth
10-03-10, 09:41 PM
ritchy what would mine have coz i think iv got screws on mine to
fixed scotts o n saturday, clips where all missing but pinched 3 from the grill for a temporary fix, seems pretty solid till he can get some more:)
I soo want a car lift
Na you don't! Get a good trolley jack with a nice amount of lift and you can get under easy! :happy:
We got one of these (http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_25 4057_langId_-1_categoryId_165727) last week for £34.99 - Can't complain! :strongbench:
you can get to it from above just, if you dont have aircon its a doddle
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.