Maxxed_Ross
21-03-10, 10:12 AM
For sale
Brand new, never out of the box Scangauge II
The ScanGuageII allows you to troubleshoot your own car, read error codes, and the conditions present when the error occurred. You can also turn off the "Check Engine" light and avoid those costly trips to the mechanic
Display 4 gauges at a time from the 12 built-in digital gauges. the information is presented in Real-time!
Automatically tracks four sets of trip data - Each with 11 individually stored parameters.
The compact size of the ScanGaugeII allows you to mount just about anywhere. it's so small, you can even slip it into your pocket and take it with you.
The dimensions of the ScanGaugeII are 4.8" wide by 1.5" high by 1.0" deep. The cord from the diagnostic connector to the control/display is 6' long and about 0.2" in diameter.
The cable is detachable at the ScanGauge II and can be connected on the back or side of the unit. Once connected to your vehicles OBDII port, the ScanGaugeII automatically negotiates communications with your cars computer - It's that easy!
see
http://www.scangauge.net/
and
http://www.scangauge.net/products/product.html
for more info and some pictures
Postage will probably be about £5 for normal postage, can be sent special/recorded if required at extra cost
These retail at around the £130 mark, I'm after £100 ono
Brand new, never out of the box Scangauge II
The ScanGuageII allows you to troubleshoot your own car, read error codes, and the conditions present when the error occurred. You can also turn off the "Check Engine" light and avoid those costly trips to the mechanic
Display 4 gauges at a time from the 12 built-in digital gauges. the information is presented in Real-time!
Automatically tracks four sets of trip data - Each with 11 individually stored parameters.
The compact size of the ScanGaugeII allows you to mount just about anywhere. it's so small, you can even slip it into your pocket and take it with you.
The dimensions of the ScanGaugeII are 4.8" wide by 1.5" high by 1.0" deep. The cord from the diagnostic connector to the control/display is 6' long and about 0.2" in diameter.
The cable is detachable at the ScanGauge II and can be connected on the back or side of the unit. Once connected to your vehicles OBDII port, the ScanGaugeII automatically negotiates communications with your cars computer - It's that easy!
see
http://www.scangauge.net/
and
http://www.scangauge.net/products/product.html
for more info and some pictures
Postage will probably be about £5 for normal postage, can be sent special/recorded if required at extra cost
These retail at around the £130 mark, I'm after £100 ono