PDA

View Full Version : MG ZS Big Brake Kit willwood 310 mm


Supercharged_Z
23-08-10, 11:11 AM
Gents,

I have for sale a GBE Willwood big brake kit a direct fit to the zs, 110, 120 and 180

These are a 4 pot caliper so miles better than the single pot the std zs uses, the disks are 310mm so 30mm bigger than the 180.

these are a highly regarded brake setup and perform very well on track and on road, pads cost just ?55 and disks when needed are around ?150 for the pair, so not to costly.

I recently bought new disks and fairly new pads the disks have done 5 miles pads probably 200.

One caliper is in need of a refurb, infact i would say it wise to do both, this involves taking the pots out and cleaning them replacing the seal and putting back in, sadly one of the pots is slighty damaged but a replacement is ?12 and seals are ?12 all in (all 8 pots)

Grant at GBE has said a refurb would be from ?50 to around ?200 max worst case.

anybody who has a bit of time could take the pots out and clean them, i just want them gone.

they cost over ?900 when bought new

i would like just ?400 inc delivery, no offers though

to cap if you wanted to refurb these at home it would cost around 24 quid!!

http://i8.photobucket.com/albums/a29/rossc0_ti/IMG_0368.jpg
http://i8.photobucket.com/albums/a29/rossc0_ti/IMG_0372.jpg
http://i8.photobucket.com/albums/a29/rossc0_ti/IMG_0378.jpg
http://i8.photobucket.com/albums/a29/rossc0_ti/IMG_0377.jpg
http://i8.photobucket.com/albums/a29/rossc0_ti/IMG_0374.jpg

Jay-ZS+
23-08-10, 12:14 PM
I refurbed my 4pots and it was very easy, new seals and a lick of paint and they will come up nice.

If anyone is intrested theres a great guide on Rovertech of how to refurb similar 4 pots. This setup is very simple to fit on the ZS hub as well.

Good luck with the sale Ross :)