PDA

View Full Version : been a busy day yest

lawrence-zs180
15-10-10, 01:32 PM
Well with the fine day we had yest I just had to get on with the mounting list for the zed plus the impending mot on wed times getting short, so I blead the rear discs and did the front discs and pads.. sooo much easier when i found the impact driver haha, then i rebuilt both vis motors using my last spare balance motor.. more to come on the upgrade idea.. then i finally fitted jays mil elimanitor, but the lights still on!! sooo either I have not crimped it tight enough of there is another problem, its going to my local xpart on monday to go on the test book.. another ?30! Will it affect the mot if its on and its just that I have not fitted the mil kit right??
Its got 4 new conti's going on on tues as well then hopefully it will fly through the mot.. bloody better had is all I can say.
Im hoping this will swing it lol.
http://i1205.photobucket.com/albums/bb423/lawrence-zs180/2010-10-14154212.jpg
stamford
15-10-10, 02:54 PM
If I recall the light will need to be wiped off as crimping in the mil kit won't extinguish it. Mine has been through two MOTs with the engine light on....................how can they fail it if it passes its emissions test? I have a kit but keep forgetting to fit it! My light comes and goes at pleasure!
lawrence-zs180
15-10-10, 04:34 PM
ahhh thats good to know, well hopefully it will go away on monday morning then lol.
Jay-ZS+
15-10-10, 05:04 PM
Yer the code will need to be erased with a reader, or it will eventually go out itself.
I will have my reader in the car for the southern meet if it hasnt gone out by then :)
lawrence-zs180
15-10-10, 05:08 PM
ohhh really, mmm might cancel it then and save myself the money lol... if thats cool with you dude?
Jay-ZS+
15-10-10, 05:11 PM
yer course mate no worries. :)
ZS
15-10-10, 05:13 PM
lawremce, I'm only 50 miles ware from you... :P Your welcome to pop over and I'll wipe the codes off for you :) (with my reader)
lawrence-zs180
15-10-10, 05:19 PM
I actually work in houghton nxt to arundel so im even closer than that lol... problem is the restaurant is manic aver the weekend then im off from wed-sunday so I might just wait till the sunday cheers though dude... oh and the lawremce is a epic fail on my part it should be lawrence.. but I dont know how to change it hahah
peterzs
15-10-10, 05:52 PM
And I thought it was a security thing.

:laugh::laugh::laugh::laugh:
lawrence-zs180
15-10-10, 06:01 PM
na just signed up half asleep... or was it half drunk haha, still atleast im not my mate... he woke up last sunday to a message from ebay saying congrats you have won a honda s2000 for 7K haha!!!!
Jay-ZS+
15-10-10, 06:02 PM
Pete will have the powers to change it :)
lawrence-zs180
15-10-10, 06:06 PM
pleeeeeeeeease pete lol its annoying it should be lawrence-zs180
peterzs
15-10-10, 06:11 PM
I'm too busy looking for the little blue pills!!!!

:yes::yes:

I'll have a look, but you could end up banned, or even worse!!!!

:laugh::laugh::laugh::laugh:
lawrence-zs180
15-10-10, 06:13 PM
lol thats what I like to hear a dude with confidence in his skills haha
peterzs
15-10-10, 06:16 PM
lol thats what I like to hear a dude with confidence in his skills haha

Just changed it, doh still "m", I'll get back in and try again.

:laugh::laugh::laugh:
peterzs
15-10-10, 06:23 PM
Can change it but dosnt save it, think its got to be a Moderator, stepping above my limits, sorry Lawremce!!!!!

:yes::yes::laugh::laugh::laugh:

Have to wait for a big boy to sort you out.

:laugh::laugh::laugh::laugh:
lawrence-zs180
15-10-10, 06:24 PM
thats totally cool dude, cheers for trying though.
daytona365
15-10-10, 06:26 PM
yer course mate no worries. :)

You going to be busy, what with helping me with my inlet manifold. Set up a little tent lol.:gathering:
stamford
15-10-10, 10:06 PM
Sorted Lawrence...............assuming he realises when he goes to log in! ;)
lawrence-zs180
15-10-10, 10:13 PM
Wooooooo cheers dude your a legend
stamford
15-10-10, 10:17 PM
I did wonder about the 'm' but you never said anything so assumed it was intentional! Glad to be of service! :D
lawrence-zs180
15-10-10, 10:30 PM
Lol thought it was a final thing.. was deff a 'oh balls' moment haha
talkingcars
16-10-10, 08:50 AM
lamrewce - I'm in Horsham if you want to pop in and borrow my scan gauge.

James
lawrence-zs180
16-10-10, 08:52 AM
Cheers james thats really cool... stroke of luck this morning though... the light went out woooooo so happy bunny now. cheers for the offer though dude.
peterzs
16-10-10, 09:25 AM
Name change and no light, must be your birthday!!!!

;););)
lawrence-zs180
16-10-10, 09:54 AM
lol yea wooo.. cheers though guys
Jay-ZS+
16-10-10, 10:19 AM
Thats cool, they do eventually go out themselves but can take a while!
lawrence-zs180
16-10-10, 10:25 AM
still might get you to check my vis are working though if thats cool.. the dam things are making me paranoid lol
Jay-ZS+
16-10-10, 05:39 PM
You going to be busy, what with helping me with my inlet manifold. Set up a little tent lol.:gathering:

Theres a good guide on XPF for removing the plenum
http://forums.xpowerforums.com/showthread.php?t=53130&highlight=fuel+rail+seal
stamford
16-10-10, 09:56 PM
Theres a good guide on XPF for removing the plenum
http://forums.xpowerforums.com/showthread.php?t=53130&highlight=fuel+rail+seal

Can't see it unless I log in............is it the full inlet manifolds as well as the plenum? If it is just the plenum then the guide is on here.