View Full Version : Lowering springs for non v6 on the bay!!
Mr ZS180
26-03-11, 12:16 PM
Just found this, thought it might be of interest to someone
http://cgi.ebay.co.uk/MG-ZS-Jamex-Lowering-Springs-/320676494438?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4aa9cefc66
Bobdope2002
26-03-11, 12:26 PM
hmmmm sent him a question
Mr ZS180
26-03-11, 12:30 PM
What you ask?
Bobdope2002
26-03-11, 12:33 PM
What you ask?
if theyd fit me 110 it doesnt state if it would or not
fastmike
26-03-11, 01:26 PM
reading the add...... they'er for the 4 cylinder cars
Bobdope2002
26-03-11, 01:29 PM
reading the add...... they'er for the 4 cylinder cars
im assuming theyre be a difference in weight between the 110 and the 120 so just to make sure eh
petet16
26-03-11, 01:47 PM
You should be fine all ZS share the same rear springs, and there are 2 different front springs 1 for the diesel and V6, and the other for K4 cars, but it does no harm to check with the seller.
I've been wondering about this for ages ?
Are the Dervs and the V6 the same, IE would i look for a 180 set up if wanted to change mine?
petet16
26-03-11, 08:58 PM
They are the same yes, the problem being the very small choice of lowered front springs for the v6 and derv
gsinclairzs
28-03-11, 09:09 AM
Dont do it!!!!! Looking at the photo, these are exactly the same springs I first fitted to my Z. These are definitely for the civic and the car wont sit correct at the rear.
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.