BigPower T16 400 breaking

[SSAuto]

Due to yet more bad luck and a knock developing upon turning the bloody ignition on, and not being able to afford a rebuild, it is with huge regret and massive financial loss that i may be breaking the beast. I will be inspecting the engine and seeing whats wrong, but if i have takers and its too expensive to fix it will be broken.

2 outtakes from a thread on another forum, but essentially , if you can see something you want, make me an offer, and i have tons of spares.

Parts of interest:

ZS180 front brakes with grooved and drilled discs and red stuff pads - ?100
Full poly bushed suspension retail ?480+VAT + Fitting - ?300
BBS LM-R replica 17" wheels with nearly new Falken912 tyres all round - ?500 or ?550 with 16 McGuard purple locking wheel nuts and key including 4 extra spare nuts.
Spax coilovers rear drivers side adjustment knob has seized hence price of ?300
Full mynheer bodykit - ?120
Dehandled rear doors - ?100 the pair
Full 420 GSDI grey leather with no marks, mint condition - ?120
ZS dash/armrest/centre console and 4 doorcards - ?80
Recaro speed seats in grey with genuine recaro subframes worth ?350 (seats go for ?300 as well) - ?500 (?250 subframes, ?250 Seats)
Only set of M3 mirrors with genuine 400/zs moulded baseplates - ?50
Delocked tailgate - ?35
Louvred bonnet - ?80
RGM splitter - ?20
T16 conversion kit including engine mounts/gearlinkages, everything to drop a t16 engine into a 400/ZS
Full ?1200 Longlife 2.75" turbo back exhaust with lobster back downpipe , can split - ?600
Steel caged Type B Ti gearbox ?250
GBE Race spec kevlar paddle clutch done 1000 miles, literally just bedded in so you dont have to wait weeks to bed in - ?300
Front mount intercooler with mounts and your choice of blue or purple samco hoses (IC is huge) ?200
Samco coolant hose kit in purple, can be used on a zs/400conversion or a 200 full kit including SFS matrix hoses not just the basic ?200 samco kit - ?285
Silverstorm stainless rails all 4 NLA - ?150
GT2876R Garrett turbo with 1500miles on the clock - ?500
Motec M800 engine management with all options, traction control, launch control, anti lag, with PC link, lambda, 3 bar map sensor and coil pack - ?1500
Cosworth designed 8 injector plenum/inlet manifold , good for 600hp currently, more if you change injectors , receipt for ?1100 - ?300
FSE with new gauge - ?60
Walbro 355lph fuel pump - ?50
Brand new ERL aquamist water injection HFS2 kit in box, rrp of 580 - ?380
HKS SSQV - ?60
Ported and heat wrapped t16 exhaust manifold - ?30
Nearly Brand new 220 Power steering pipes (the ones that burst) - ?100
Paspump/waterpump housing with new pumps and seals 300 miles ago - ?60
2 TV screens with all wiring - ?40

http://i3.photobucket.com/albums/y70/Cooptub/DSCF2138.jpg
http://i3.photobucket.com/albums/y70/Cooptub/tv.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF20122.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2003.jpg
http://i3.photobucket.com/albums/y70/Cooptub/Rover400BHP/DSCF2045.jpg
http://i3.photobucket.com/albums/y70/Cooptub/Rover400BHP/DSCF2094.jpg
http://i3.photobucket.com/albums/y70/Cooptub/Rover400BHP/DSCF2046.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2003-1.jpg

OK, the bonnet lifters are for sale, make me an offer, i dont know what theyre worth except to me for my next project.

The seats are very good for evo3 seats, could do with a drivers outer bolster if im picky, they cost ?30 and take 10mins to fit. Im happy to sell the subframes seperately for ?250ovno and you can find your own seats.

CDA-9857R - Its a seriously good bit of kit with bus connector, aux outs for front, rear and sub speakers. 4 x 60w if you dont want to run amplified. Check it out on google. Comes with cage and everything.

Rear brakes im 99% sure are regular coupe turbo/ 420 etc, but with yellowstuff and drilled and grooved. Also have brand new rear coupe turbo calipers.

Storm single wiper conversion kit also.

Near brand new heavy duty alternator.

With regards to the bodykit, bear in mind its missing the skirts in most of the pics, you can see them in one or two in the top post, i think in a subtle colour they look great.

Some more pics, have a good look:

http://i3.photobucket.com/albums/y70/Cooptub/DSCF2158.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2159-1.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2157.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2156.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2138.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2155.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2154.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2153.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2152.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2150.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2125.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2127.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2145.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2121.jpg
http://i3.photobucket.com/albums/y70/Cooptub/DSCF2149.jpg

[SSAuto]

Oh, and the exhaust has one fake and one real back box.

[peterzs]

Shame if it has to go, but all the best with it, was a mighty motor.

[Supercharged_Z]

is the engine knocking?

[mattie007]

Do the front brakes include the calipers?

[Maxxed_Ross]

PM sent!

[SSAuto]

Hi there,

Yep, the brakes include the calipers, carriers (harder to come buy), EBC discs with no lip whatsoever, and pads.

[SSAuto]

Oh and someone please buy these rims, they looks sooooooooo sweet on a Z/ 400 / MB6

[Maxxed_Ross]

I'd love the gearbox, but postage would be insane!

[carmadbaker]

You would be suprised mate give it a quote up!

[petet16]

I'd love the gearbox, but postage would be insane!

pg1 only weighs 38 kg, it wouldn't cost that much, go for it, you know you want to:whistle:

[Maxxed_Ross]

I would have my nuts cut off if I bought ANOTHER gearbox... I've got 3 already!

[SSAuto]

Bump

Anyone after any of the body parts?

Skirts - ?80
Front splitter (and bumper if you want it) - ?30 Great for a huge FMIC
Rear bumper with spats - ?40
Louvred bonnet - ?80
Smoothed (delocked) rear tailgate - ?50
Rear mynheer spoiler - ?40
M3 mirrors with one off mynheer baseplates so they dont look bolted on ?60
Rear dehandled doors - ?80 the pair
Mint front wings - ?50 the pair

[SSAuto]

Nobody want a complete 400 to ZS180 interior conversion (exceot seats) ?

Or full polybush kit to bolt straight on?

Full ?1400 longlife exhaust for a 400/zs with a t16 engine in?

Or even any of the body?

Possibly even some BBS LM-Rs (high quality replicas) with awesome tyres?

[Supercharged_Z]

Interior dosnt fit easily

[mattie007]

Did you get my pm? Although the first page states ?100 for the brakes?

[SSAuto]

Hi,

Sorry ive been in Newcastle with sh!tty reception. I didnt write out the prices on the first page. But yep if you want em, theyre yours.

Mark

[mattie007]

No probs.
It says ?100 on the front page ;)
Are red stuff pads ok for road use?

[SSAuto]

Yeah , i know alot of people who use yellows for road use.

?100 plus P&P and insurance. SO ?120 all in as paypal gift or bank tranny , or ?127 as a regular payment where i take the hit on fees./

[SSAuto]

Last few bits on egay

http://shop.ebay.co.uk/silverstormauto/m.html?_trksid=p4340.l2562

[mattie007]

Yeah , i know alot of people who use yellows for road use.

?100 plus P&P and insurance. SO ?120 all in as paypal gift or bank tranny , or ?127 as a regular payment where i take the hit on fees./

Sorry my mistake!
Yeh thats fine, thats for carriers, calipers, discs and pads? Basically everything I need for a conversion?

PM me your paypal address.
Matt

[SSAuto]

Hi fella, wmswallis@Aol.com

[mattie007]

For some reason it doesnt recognise that paypal address?

[SSAuto]

erm, try a small A so:

wmswallis@aol.com

[SSAuto]

Bttt

[Maxxed_Ross]

sent you another PM, apologies for the delay!

[SSAuto]

Bump

Full polybush kit FITTED in the suspension parts. , so youre talking ?528 of parts plus around ?280 labour. - ?350. Covered 1500miles.

Lower strut brace - ?40
Rear upper ?40

Mirrored windows - ?70 for all 4.

Various ZS bits of trim.

Single wiper.

Most of the stuff here is still available as ive been away for work.

Silverstorm stainless coolant rails.

[ZRed]

can you update this with what`s left mate?

[SSAuto]

All except head, motec, BOV, ICE.

[Maxxed_Ross]

I sent payment the other day for the driveshafts and radiator, did you get it ok?

[SSAuto]

PMd

[ZRed]

turbo still available mate?

[SSAuto]

no sorry

[SSAuto]

No one after some rawesome seats:

http://www.ebay.co.uk/itm/180715133118?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_720wt_1139

[Bobdope2002]

No one after some rawesome seats:

http://www.ebay.co.uk/itm/180715133118?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_720wt_1139

for that price no sorry

[SSAuto]

Well, you aint gonna get them for less me old mucka.

Seats - ?1120
Subframes - c?380

Used seats - ?4-800
Used subframes - ?2-300

[JIMZS180]

you got the tubes inside the seats for the rear headrests???? if so how much??

[SSAuto]

Seats are sold as a whole

[Supercharged_Z]

Well, you aint gonna get them for less me old mucka.

Seats - ?1120
Subframes - c?380

Used seats - ?4-800
Used subframes - ?2-300

i dont think this is realistic looking at ebay.

I have an less amount put aside for seats, if they fit a zs and you cant sell then let me know, i would require the weigh of them though

Cheers


big edit.


2000 posts :)

[SSAuto]

Well,

Ive had at least a dozen offers of ?300 JUST for the seats, so show me your examples of ZS/400 subframes with recaro speeds at ?225?

[carmadbaker]

http://www.ebay.co.uk/itm/Mitsubishi-Evo-5-6-Recaro-Front-Seats-/220841726957?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item336b3153ed#ht_500wt_1156

The prices are all over the place i must admit! i probably would of stuck yours up roughly the same as you, really are so diverse! speaking to my evo breaking friend he sells 7/8 seats for around the ?200 mark ish! (condition dependent)

then made my subframes from ?20 worth of flat bar and ?10 of ZS seat runner from scrappy, can make anything fit anything :) :thumbsup:

Obv not here to tell you that your wrong or whatever, more interested in helping you with a realistic price so you get some monies in your pocket asap :thumbsup:

[mattie007]

Still not received photos of the brakes :)

[SSAuto]

Someone must want the daddy of all gearboxes!

[Maxxed_Ross]

Got my drive shafts last time I was at home dude, thanks!

Just hope they fit now lol