PDA

View Full Version : mg rover parts to get rid of


SimonMGZS
14-08-11, 11:48 AM
hi guys
i have got a load of parts to get rid of.
here is the list of what i have got.

mg parts mk1
4 door cards with trophy blue inserts electric fronts manual rears. (sold)
all the black plastic trim panels.(sold)
centre console with trophy blue insert (sold)
handle brake console.(sold)
mg zs/rover 45 dashboard in black.(sold)

these came out of a hatchback vehicle.

rover 414i hatchback parts

all the exterior parts off this car are in silver and the interior parts are grey

4 cloth seats front/rear
4 doors which three still have the door cards and window mechanisms still attached.the front are electric and rear are manuals.will strip if people just require the mechanisms.
bootlid with glass in and wiper motor still attached.
sunroof mechanism with glass still in.
bonnet
front bumper
gearbox currently still attached to engine.
front cross member with springs,drive shafts,power steering,brake discs and calipers still attached.
passenger side front wing.
speedo/rev counter assy.
brake master cylinder
clutch master cylinder
clutch slave cylinder

drivers side wing,rear lights,front lights and rear bumper already gone.

basicly it is absolutely everything that you can think of is off this rover.When i mean everything i even mean right down to the carpet and soundproofing.

if i think of anything else to add i will do.

i am open to sensible offers on these item as they need to go.NO STUPID OFFERS LIKE A PENNY FOR THIS OR A PENNY FOR THAT.

just let me know what you need.

talkingcars
14-08-11, 12:09 PM
Are the ZS bits mk1 or 2?

SimonMGZS
14-08-11, 12:15 PM
they are mk1 and the 1st post has been amended

daytona365
14-08-11, 12:42 PM
You got any brake bits?

SimonMGZS
14-08-11, 01:30 PM
i do not have any brake bits for the mg's only for the rover 414i

Supercharged_Z
14-08-11, 01:46 PM
what brake bits do you need?