The Derv..............

[C13URD]

As a few of you may no i have sold the 180 & bought Dan's Derv..
One of Dan's old photos i found on the net..........:smile1: not took any yet.
http://i823.photobucket.com/albums/zz158/cliveb6166/Wheels005.jpg

Done....so far.... not done much as im waitin for the 180 to be picked up...
Dents removed by my dent man..
fitted chrome speedo rings..
fitted Bosch aero wiper blades...
fitted genuine MG mats
Uprated sidelight & headlight bulbs.
dash warning lights sorted...
Dented airbag changed...
Cleaned inside door shuts & under bonnet with g101..
going in for full engine service wednesday.....

To Do
clay paint work & DA polish...
fit drilled & grooved plus green stuff..& braided hoses.
remap......by reidy....
18" Kei force 10's or refurb 11 spokes.....
fit lowered springs.....
debadge rear & fit boot lip spoiler...
replace engine, fusebox & air filter cover.
replace boot carpets both sides...
paint front bumper bonnet plus rear bumper.
replace mudflaps with like for like but new.

thats wot ive got planned so far...

[stamford]

This place makes me dizzy.....................there must be quite a few cars out there with you guys names as previous owners!

[peterzs]

Great looking car when I saw it at Lawrence's pub meet, when Dan had it.

Thought it looked immaculate, you must be looking at winning a few Pride of Ownership cups!!!

Sounds like you have been busy. Have to see it when its all done.

:smile1::smile1::smile1:

[Enright]

Just curious: What dash warning lights did you have, and how did you sort them?

[C13URD]

Just curious: What dash warning lights did you have, and how did you sort them?

SRS & eml. sorted srs when i changed the airbag & took the bulb out at first for the eml but have now had the code read & switched of.. hasnt come back on..:smile1:

[C13URD]

new brakes on & Duplex cat back fitted...
just got my exhaust trims to fit back on.....:clap:...

http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss119.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss119.jpg)http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss118.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss118.jpg)http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss115.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss115.jpg)http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss120.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss120.jpg)http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss121.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss121.jpg)

[Dan1971]

Nice .....

[C13URD]

Nice .....

Cheers dude just gave it a quick clean in & out ready for my trip to Reidy's 2morow.:) ...........
http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss122.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss122.jpg)http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss123.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss123.jpg)http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss124.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss124.jpg)http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss125.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss125.jpg)http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss126.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss126.jpg)http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss127.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss127.jpg)

[peterzs]

Looking good, like the exhaust.

:hooray::hooray::):)

[C13URD]

Looking good, like the exhaust.

:hooray::hooray::):)

Thanks Peter will look alot better once ive fitted the exhaust trims,, also going back to the exhaust fitters thurs as its to loud.... gona sort it...:)

[zsserbia]

Looking good!

[Taphouse]

Very nice indeed. Excellent work.

[ZS Phil]

That exhaust looks fantastic!

[ian zs180]

Looks great mate

[C13URD]

Looking good!

Very nice indeed. Excellent work.

That exhaust looks fantastic!

Looks great mate

Thanks guys..... still got loads more i want to do but its getting there..:happy:
had the standard injectors put back yesterday & then remapped today by Reidy.

now pushing 142bhp so nippy yet economical... keeping the SDI's for a while just incase i yern for more umph.:smart:

[zsserbia]

So it can do 142 without SDI's? and no smoke? cough...

[C13URD]

So it can do 142 without SDI's? and no smoke? cough...

yes it was pushin just over 120bhp i think with the decat, blanked egr, panel filter & cat back exhaust then Reidy mapped it to 142bhp... just found it to heavy on fuel with the SDi's in.. even tho it was pushin 151bhp with um in without a remap.. as said if i ever decide to put um back in reckon Reidy would get at least 160+ out of it... happy as is for now..:happy::happy:

[Hoopla77]

Looking good clive, it hasn't taken you long to start getting it sorted...nearly as good as the 180!

[C13URD]

Looking good clive, it hasn't taken you long to start getting it sorted...nearly as good as the 180!

Cheers Steve.... not as good yet a long way off but will be... if we meet at a show again then we should park um together....:happy::happy::happy:

[zsserbia]

I'd be more than happy as well, good result. Power + economy, one couldn't ask for more, or could he ;)

[Ritchy]

looking good

[Stephen]

Good results and looking good!!

I want to get mine remapped once it's back on the road, I'd only get it done by someone who knows the l series though. I would travel down south for it, someone like Reidys or zandf Etc.

[C13URD]

Good results and looking good!!

I want to get mine remapped once it's back on the road, I'd only get it done by someone who knows the l series though. I would travel down south for it, someone like Reidys or zandf Etc.

Reidy's the man m8 trust me he know's what he's doin... Z&f are also good they did my 110 for me.. i'd only trust one of these two tho.. 3hr drive for me today & 3hrs back.. long treck in the same day......but worth it..:happy:

[C13URD]

looking good

Thanks Ritchy but lets be honest bud there isnt much that comes close to yours at the moment with that shiney new paint awesome.... love it..:happy::happy::happy:

[Maxfly]

Looks braw bud, an I love those exhausts! Very very nice!!

[C13URD]

Exhaust trims back on..............:)

http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss128.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss128.jpg)......http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss129.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss129.jpg)......http://i823.photobucket.com/albums/zz158/cliveb6166/th_zss130.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/?action=view&current=zss130.jpg)

Won some spax on ebay the other day going on soon...:shifty:

[peterzs]

Looks the biz, love it.

:bow::bow::bow:

[talkingcars]

Good results and looking good!!

I want to get mine remapped once it's back on the road, I'd only get it done by someone who knows the l series though. I would travel down south for it, someone like Reidys or zandf Etc.

Reidy for the V6 and the derv, Z&F for the 4 pot petrol.........

[talkingcars]

p.s. car is coming along nicely.

[Bobdope2002]

Looking good clive

If it were me that sticker on the rear bumper wud have been the first thing I'd have done as in remove it

[C13URD]

Looking good clive

If it were me that sticker on the rear bumper wud have been the first thing I'd have done as in remove it

Cant make my mind up on that one Tim. some people like it & some hate it. as said in two minds..:unsure::unsure::unsure:

[peterzs]

Love the sticker Clive!!!!

;);););)

[welshone]

Love the sticker Clive!!!!

;);););)

It's not big enough :laugh:

& speaking of stickers I should get some ordered :D

[Dan1971]

I liked it .....

[Bobdope2002]

Looks tacky IMO

TBH ive never liked it even commented on it when dan put it on

[C13URD]

These came yesterday... just gota get um fitted..:)

http://i823.photobucket.com/albums/zz158/cliveb6166/Wheels/th_Spax.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/Wheels/?action=view&current=Spax.jpg)

& these are coming 2morow.. tyres are coming off. look brand new but are Diamondback... & i dont do budgets... got some nice new Falkens waiting to go on..:)

http://i823.photobucket.com/albums/zz158/cliveb6166/Wheels/th_KGrHqFg8E6ZfyIOPhBOmrrrpgww60_1.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/Wheels/?action=view&current=KGrHqFg8E6ZfyIOPhBOmrrrpgww60_1.jpg).....h ttp://i823.photobucket.com/albums/zz158/cliveb6166/Wheels/th_KGrHqNmEE6CiowGbZBOmrruw-960_1.jpg (http://s823.photobucket.com/albums/zz158/cliveb6166/Wheels/?action=view&current=KGrHqNmEE6CiowGbZBOmrruw-960_1.jpg)

[lawrence-zs180]

she looks good mate and the bhp readings are a nice sight as well, do you have a end in sight? haha

[Taphouse]

Do you mind if I ask how much you paid for the Spax?

[C13URD]

Do you mind if I ask how much you paid for the Spax?

Won um on ebay...... £235.:shifty::shifty::shifty:

[Steves Cleenz]

how did it go at reidys Clive?

i want some of them wheels again :(

[Taphouse]

Won um on ebay...... £235.:shifty::shifty::shifty:

Good price! Will they need a re-building?

[C13URD]

how did it go at reidys Clive?

i want some of them wheels again :(

i had the stock injectors put back in then re-mapped pushin 142bhp, was eatin fuel with the sdi's in, still got um incase i decide i want more power!

regarding the wheels i was searching ebay & found them listed for a Mini which is the same fittment i think so bid on um. only two small marks on um thats it.

Good price! Will they need a re-building?

they look ok, were advertised as fully working except the rear offside damping adjustment has seized. not sure were to get um re-built or how much it would cost.. was just gona have um fitted & see how they are.