View Full Version : How to Guides
lukiep160
12-07-07, 10:41 PM
Is there anyone that requires any specific how to guides, please post here with your requests and i'll do my best to create one for you and post it in the how to section.
I will start to make standard service ones over the coming week or so.
Head gasket one I guess would be very useful for the k series boys :D
not me fingers crossed :)
stamford
13-07-07, 07:11 AM
I want to lay an extension on my concrete driveway.....................:no: okay i'll get me coat............
Robstar
13-07-07, 09:34 AM
Well im just getting into all this engineering milakybut it would be great if you could post one to install a enclosed induction kit.
Thanks Matey
TurboZed
13-07-07, 10:58 AM
Vis valve repair and fitting an oil catch tank probably would be good for the 180 guys. Also a cambelt change on an L series would also be usefull for us tractor drivers:thumbsup:
Jim
chriszs180
13-07-07, 11:00 AM
how about changing disks and pads on the breaks need to move my ebc ones to the 180 when i get it...
lukiep160
13-07-07, 05:30 PM
how about changing disks and pads on the breaks need to move my ebc ones to the 180 when i get it...
That one is on the way, i'm going to take some proper photos when i next change a set of pads
TurboZed
13-07-07, 07:17 PM
But dont 180's have bigger disks than 120's? or have you previously upgraded?
Jim
lukiep160
13-07-07, 08:19 PM
But dont 180's have bigger disks than 120's? or have you previously upgraded?
Jim
they are indeed bigger by 20mm but changing disc and pads is the same principle on both
arwilson80
14-07-07, 10:33 PM
Discs and pads... Once you have done them once you'll be able to do almost any.
lukiep160
25-07-07, 09:30 PM
How to change rear discs and pads coming tomorrow
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.