Need for custom ZS parts?

[rakester]

Hi, I was wondering if you ZS boys would have any interest in some custom made parts that would be made from alloy, anodised and even engraving options.

I'm not talking large scale parts but engine bay bits / bling, interior bits, handles, caps etc

Any interest let me know, I would not be able to do one offs so would need to be parts that have multiple interest. Similar to the oil cap I did for the ZR site...

http://i204.photobucket.com/albums/bb277/jackass_jake/83f474fa.jpg

cheers!

[Smokey]

Battery cover, replacement fuse box lid, oil cap to name a couple of things!

[magpie67]

Battery cover, replacement fuse box lid, oil cap to name a couple of things!

what he said :yes:

[ZS]

what he said :yes:

I suppose if its shiny you'll want it? Lol ;)

[gary471]

Battery cover, replacement fuse box lid, oil cap to name a couple of things!

Dipstrick handle?

[magpie67]

I suppose if its shiny you'll want it? Lol ;)

very good :yes: but..........................yeah :punk:

[BUCKYDEVIL]

Seen on the ZR you might be involved in making cam Pully/Vernier covers from clear plastic ?
Im interested in one of these if it happens and sure you might be able to shift a few more on this forum

[Nobrainer]

Was checking out your dipsticks earlier on the ZR site. I'd be up for some blingy bits

[Ritchy]

if you could make exact copes of the power steering cap in red anodised alloy id be well up for one:)

[Enright]

Was checking out your dipsticks earlier on the ZR site.

Oh, it's full of them! :D

[rakester]

Battery cover, replacement fuse box lid, oil cap to name a couple of things!

All can be done, I would need a bit of interest off other members though to pursue it.

Dipstrick handle?

Easy peasy :) Does anyone know if the KV6 oil dipstik is different the 4 cylinder K series? I presume they are different but if by some chance they are the same I could them done in around 3 weeks ish.

if you could make exact copes of the power steering cap in red anodised alloy id be well up for one:)

Yup! is this for KV6 or 1.4 K?

[MG6Turbo]

Oh, it's full of them! :D:bow::bow::bow::bow::bow::bow::bow::bow::bow::bo w::bow::bow::bow::bow::bow::bow::bow:

Spot on !

[MG 53 ZED]

:smile2: If you were able to do any blingy bits for TD engine bay i'd be interested.

[MG6Turbo]

Kv6 different to k series.

G

[Ritchy]

powersteering caps are all the same, also the same as certain hondas like the crv

[MG6Turbo]

I was meaning the dipstick !!

[Ritchy]

should have quoted was replying to jakes post

[Dav]

Kv6 different to k series.

G

Really? ;)


Only messin' :)

[gary471]

All can be done, I would need a bit of interest off other members though to pursue it.



Easy peasy :) Does anyone know if the KV6 oil dipstik is different the 4 cylinder K series? I presume they are different but if by some chance they are the same I could them done in around 3 weeks ish.



Yup! is this for KV6 or 1.4 K?

I'll have 1x Everything prices dependant.
You should get a bit of interest I would have thought.
I'd love a shiney front & rear strut Brace for zs180. Ac pipes are an issue apparently. Mite be a reasonable challenge for you. You'd shift a few of them aswell I bet

[rakester]

I will be designing a strut brace in the future, would need to borrow a members car though as no longer have a ZS.

Thank you RoverMGparts for confirming the dipsticks are different, suspected they would be, things are never simple haha :)

[Smokey]

I have a spare v6 dipstick you can use if needed.

[chris106]

Id be interested in a few parts...

[ZS]

I will be designing a strut brace in the future, would need to borrow a members car though as no longer have a ZS.

Thank you RoverMGparts for confirming the dipsticks are different, suspected they would be, things are never simple haha :)

I can provide details of upper and lower rear strut braces if you are going to be making some of them up?

They are destined (I think) for the Track car, but I'm sure Smokey won't object to you taking measurements or what not?

[petet16]

I'd take a couple of front upper strut braces, and might well be tempted by a bit of engine bay bling:smile1:

[Smokey]

Not at all Sam :)

[rakester]

If details can be provided of the strut braces that would be grand :)

Also if you guys want some custom oil dipsticks made I'll take Smokey up on his offer :)

[Smokey]

Just send me your address mate and it's yours. I painted it xpower green lol! Do you need the end or the whole thing?

[rakester]

Just send me your address mate and it's yours. I painted it xpower green lol! Do you need the end or the whole thing?

The whole thing ideally :)

Will send you a PM now :)

[Nobrainer]

Any movement? Need to spend money before the wife notices :-)

[Maxxed_Ross]

I quite fancy a cover for the T series if you can do them?

[ian Harris]

I'd be interested in dipstick and filler cap and poss more depending on funds