Dumb Cambelt Question

[Steven11]

Not very mechanical so forgive me is this is a stupid question, but is it true that my MK2 180 has 3 Cambelts and that the engine has to come out to change them all. If so why does it need 3 belts and do you really need to change ALL of them. Can i get away with changing 1 or 2 of them to save some money on labour.

[Ritchy]

yep has 3 and no it doesnt need to come out, but it is a very involved job with a lot of strip down, one large one at the front and 2 at the rear, and yes would be advisable to change all 3 of them

[Steven11]

yep has 3 and no it doesnt need to come out, but it is a very involved job with a lot of strip down, one large one at the front and 2 at the rear, and yes would be advisable to change all 3 of them

If i booked it into your place Ritchy could i specify that i want you to do it, and do you have any idea what it would cost (ballpark) ?

[Ritchy]

ive never done one and no i doubt it haha, jobs just get handed out to anyone in general, wouldnt bring it into a main dealer tbh they charge a fortune for it, dont see an isue with it being done but you could get the same job done else where cheaper with the same quality, and its not something i want to take on up the house either unless it was my own car.
im not sure if graham would take it on aka ZRED, he's just gone full time at his garage, may be worth giving him a shout, hes just got married today so be a week likely before you get a reply,, guys good at what he does though and takes pride in his jobs
either him or try dreadnaught in callander, they specialize in mg and they have a really good reputation, they are the 2 people id be speaking to around here

[Steven11]

ive never done one and no i doubt it haha, jobs just get handed out to anyone in general, wouldnt bring it into a main dealer tbh they charge a fortune for it, dont see an isue with it being done but you could get the same job done else where cheaper with the same quality, and its not something i want to take on up the house either unless it was my own car.
im not sure if graham would take it on aka ZRED, he's just gone full time at his garage, may be worth giving him a shout, hes just got married today so be a week likely before you get a reply,, guys good at what he does though and takes pride in his jobs
either him or try dreadnaught in callander, they specialize in mg and they have a really good reputation, they are the 2 people id be speaking to around here

Really appreciate the info Ritchy, ill defo take your advice on board. really keen to get it done soon as i grudge spending any more money on the car incase i do and it goes bang the next day. The cars now 7 years old with 70,000 miles and is still on the original belts. Fair to say im tempting fait a bit.

[talkingcars]

I would always get all 3 done, the 2 smaller ones are easy but there is no point in changing them and leaving the big one.

TBH I think there is more chance of one failing if you change the others as there will be more stress on the old ones.

[Steven11]

Why are there 3, what do they all do ?

[talkingcars]

The main one connects the crank shaft to the heads, the 2 shorter ones at the other end of the engine connect inlet and exhaust cams.

[tb steve]

belts do
the cams
water pump
power steering pump
air con pump
oil pump
alternator

think that's all lol

[Ritchy]

the timing belts only do the cams and the waterpump, the aux belt drives the alt powersteering and aircon

[talkingcars]

Main belt does these


water pump
power steering pump
air con pump
oil pump
alternator

[KevG]

http://www.youtube.com/watch?v=YC7i5R6lpEQ&feature=relmfu

http://www.youtube.com/watch?v=05Wl0dkoQwc&feature=plcp

http://www.youtube.com/watch?v=2fFx8SPiTSc&feature=context-cha

[talkingcars]

Does that mean there are 4 belts?

[Steven11]

I take it ide be aswell doing the water pump while im there

[Ritchy]

yeah pretty much, and james theres 3 timing belts and 1 aux belt

[talkingcars]

I take it ide be aswell doing the water pump while im there

Yes

[Captain Slow]

Main belt does these

Main cambelt does the oil pump, cam & crank shafts & water pump.

A/C pump, PAS pump & alternator are driven by the auxiliary belt.

[Fred68]

Main cambelt does the oil pump, cam & crank shafts & water pump.

A/C pump, PAS pump & alternator are driven by the auxiliary belt.

Oil pump is driven by a flat on the crankshaft nose inside the oil pump housing ;)