PDA

View Full Version : VIS units

Cally180
15-11-12, 03:46 PM
as above, drop me a message if anyone has spares :)
scotttait
15-11-12, 05:11 PM
What's up with the old ones?
Cally180
15-11-12, 05:17 PM
the bigger one out the two wont move (orange part see pic)

http://i200.photobucket.com/albums/aa255/CalluM_050/D7A09634-3123-4A16-AAAD-456C0506D389-1890-000001982D0D26E1.jpg



tried having it out the manifold and turn the ignition on to see if it resets but nothing no movement... every other one I have seen, the orange part is sitting about 3 O'clock and not 7 like mine is.

so just going to replace it.
scotttait
15-11-12, 05:22 PM
about a week after purchasing my zed 180 my power motor packed in, I bought one from Morrisons mg garage in Stirling, £120 I think. Then realised if I looked about I could of got it for a lot less. There is a repair that can be done, I found a tread for it, after purchasing a new one!
grimmy
15-11-12, 05:29 PM
the bigger one out the two wont move (orange part see pic)

http://i200.photobucket.com/albums/aa255/CalluM_050/D7A09634-3123-4A16-AAAD-456C0506D389-1890-000001982D0D26E1.jpg



tried having it out the manifold and turn the ignition on to see if it resets but nothing no movement... every other one I have seen, the orange part is sitting about 3 O'clock and not 7 like mine is.

so just going to replace it.

Take it apart and resolder all the joints on the board.chances are it will repair it.do a search on vis repair for a how to.