View Full Version : BRM gearbox wanted
Noobrider
18-01-13, 07:02 PM
yep I would like a cheap BRM gearbox for the 180 track car.
They are a closer ratio with a Torsion B LSD as standard
Gearbox code is B6BST
I would also settle for a Lotus Exige S1 gearbox with code B4BPQ
Won't fit the kv6 as different bell housing. You could change it but bearings can be different size.
Noobrider
18-01-13, 07:49 PM
From what I understood it was a PG1 gearbox the same as fitted to the Mk1 180 but with different internals.
If it doesn't, thats not a problem as I can get the internals swapped into my gearbox, I was pretty sure they were exactly the same though?
petet16
18-01-13, 08:39 PM
An Exige box won't fit a v6 either
the 180 box is a 'u' box, the 1.8 boxes are non 'u'
you can fit non u internals into a zs box using the correct bearings.
I thought the brm box was a 3.9 final anyway, a track car would be better with a 4.2?
Yup to all the above. Good post. Only thing good about the brm box is the diff.
Noobrider
19-01-13, 03:55 PM
hmmm, thanks guys, might have a rethink but then again, I would like an LSD even if I have to rip one out of a box its cheaper than trying to find one
620ti box, straight swap. Same ratios.
620ti box, straight swap. Same ratios.
the ti box is same ratios as the 180?? I didn't know that...
I have one in stock just now and another coming in.
Noobrider
29-01-13, 07:34 PM
and the price is?.....
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.