KevG
04-02-13, 09:41 PM
Now Sold
Up for grabs is the Brembo big brake setup for the Rover Tomcat(R8), ZR and ZS, as sold on Rovertech forum.
I got all the bits plus the adaptor kit made for me from information from PeteT16 (Pete) and sneekyparrot (Paul), I also have the fitting kit supplied by Rob on Rovertech too!
The kit comprises of:
2 x 326mm Mk1 Ford Focus RS discs redrilled to 4x100 PCD
2 x 7mm Aluminium Spacer
2 x Peugeot 406 Coupe Brembo Calipers Repainted in Gloss Black and with Green Brembo Graphics
2 x Banjo bolts with sealing washers (not copper washers, as these dont work with the calipers)
Full Axle set of brake pads for above calipers, roughly covered 2k miles, lots of meat left on them.
Set of Adaptors brackets, bolts and washers.
I spend a bit of cash on these, so I would like what I paid roughly back, so I'm wanting around £270 no offers, postage can be arranged for extra, but may be pricey as all the metal is heavy.
This is a good kit but I may be going into the 5 stud conversion, and getting the Honda DC5 Integra brake setup.
The discs have a slight warp, but they were cheap discs to get me going, so will probably need replaced.
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/526059_420115261386125_1464984860_n.jpg
Up for grabs is the Brembo big brake setup for the Rover Tomcat(R8), ZR and ZS, as sold on Rovertech forum.
I got all the bits plus the adaptor kit made for me from information from PeteT16 (Pete) and sneekyparrot (Paul), I also have the fitting kit supplied by Rob on Rovertech too!
The kit comprises of:
2 x 326mm Mk1 Ford Focus RS discs redrilled to 4x100 PCD
2 x 7mm Aluminium Spacer
2 x Peugeot 406 Coupe Brembo Calipers Repainted in Gloss Black and with Green Brembo Graphics
2 x Banjo bolts with sealing washers (not copper washers, as these dont work with the calipers)
Full Axle set of brake pads for above calipers, roughly covered 2k miles, lots of meat left on them.
Set of Adaptors brackets, bolts and washers.
I spend a bit of cash on these, so I would like what I paid roughly back, so I'm wanting around £270 no offers, postage can be arranged for extra, but may be pricey as all the metal is heavy.
This is a good kit but I may be going into the 5 stud conversion, and getting the Honda DC5 Integra brake setup.
The discs have a slight warp, but they were cheap discs to get me going, so will probably need replaced.
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/526059_420115261386125_1464984860_n.jpg