Exhaust & Wheels

[Craig-ZS180]

I know not the best way to start this off as have no photos at present to put up but I was wondering if anyone on here would be interested in or knows of anyone after a stainless centre section off of a rover coupe turbo, I had it on my old cabby with the T series conversion done. From memory its a Piper I believe but would have to check and will also get a pic or two up of it.
Was thinking about price in the region of £50 collected but open to offers.

I also have a set of Proton Satria Gti wheels which I used to run on my old R25 as have the same pcd and almost identical if not offset. Its not so much the wheels but the Dunlop semi slicks that are on them that I would think may be of interest to someone. Again I will get some pics of these and post them up, the tyres are used but you could easily get another couple of track days out of them if thats your thing. as were a little noisey and unpredictable on the road when you couldnt get the heat into them. Tried them on the 180 and they do clear but again didnt want to use on the road really especially with the kids now in the car.
Again looking for around £80 but as always if once pics are uploaded can see what we can come up with if any interest.

All money is now having to go into the "Wedding fund"..

Thanks, Craig

[talkingcars]

All money is now having to go into the "Wedding fund"..


Who's getting married, I thought the wedding was the womans thing and as such she should fund it - my good lady did.

[Craig-ZS180]

Who's getting married, I thought the wedding was the womans thing and as such she should fund it - my good lady did.


Haha, yeah righto. Her parents are certainly paying for the majority of it all and without the money they are giving we wouldn't be doing it. I however do want the wedding cars I want and in that they are looking to cost about 1500 for the 4 hours so I need to put something in to help fund it. We are certainly not made of money and for our special day want the best we can put together.
If I only decide the cars at least that's my bit and that's why I'm looking to sell things I no longer have need for. Only put them on here as a if anyone may be interested as I know they aren't really zs based.

[ZRed]

Interested in wheels pending pics please

[Craig-ZS180]

Interested in wheels pending pics please

They aren't in my garage at present and as I had to go to view a reception venue tonight did not get a chance to go and take some new pics of them.
They are at my mums so I should hopefully be able to sort something tomorrow after work.
Will post some up as soon as I can get them :)

[DannyZR]

What size are the wheels??

[WalkerDnB]

Seen worse alloys nice for track alloys
http://www.webwombat.com.au/motoring/images/proton-satria-gti-review-4-big.jpg

[Craig-ZS180]

That's the style right there. Just a 16" 6 spoke alloy to be fair. The wheels are not a mint set at all its more the tyres I thought would be if interest.
I did get a couple of pics this evening but the camera and computer are not getting along tonight so will need to see what's up and get them up here asap.

Always something that messes around for me :wall:

[WalkerDnB]

For some reason they remind me of speedline alloys

[ZRed]

I like them

[Craig-ZS180]

Couldn't get many pics at the time as the garage is packed full of my Dads bike bits, general rubbish and his set of 18" Brabus wheels which are blocking them all in. Also a forgotten collection of zr bits n bobs including original unprinted boot spoiler.

There are 2 wheels that have a flat spot which I had forgotten about, they were from memory used on the rear and up until I changed over to the track tyres never could tell they had been knocked in the past.
Here are a couple of pics of the tyres as after seeing the flat spot on the edge am not so keen on selling the wheels incase can't get balanced up nicely at later date.

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/SAM_4604_zps28c26668.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/SAM_4607_zps9349f31e.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/SAM_4609_zps76e5d2c0.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/SAM_4612_zpsd115003d.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/SAM_4618_zps7124134c.jpg

Here is what the wheels look like anyway

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/SAM_4622_zpsb7e370be.jpg

And the exhaust off the coupe / cabriolet turbo

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/SAM_4628_zpsc4ad3155.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/SAM_4633_zps190d1c70.jpg

As I say more up for selling the tyres as they will go again and can get them taken off the rims but now not certain on overall condition of the wheels until I can get them ou properly over the weekend and give them a proper run on the road.

[daytona365]

Just remember to keep the money in your fund, not hers, otherwise it will go on dresses, flowers, and other girly things..............

[Craig-ZS180]

Just remember to keep the money in your fund, not hers, otherwise it will go on dresses, flowers, and other girly things..............


Whatever I get for selling the bits here and there that I will be selling will be going towards a bit more spending money on the stag do and possibly little extras for the wedding cars as I know the ones I want and they ain't cheap...!

[ZRed]

What size are they mate?

[Craig-ZS180]

What size are they mate?

They are 16" wheels and tyres with iirc the oe zr tyre size that is on hairpins.
I am going to have a proper look at the wheels over the weekend though to check how they drive again, if they are not as good as I remember as last proper drive on them was a couple of years ago I will split the tyres from the wheels and keep them as a spare or weigh them in with some of my other wheels that are past it.
So atm the wheels are temporarily off the cards until I'm sure of condition.

[Craig-ZS180]

A few more pics of the wheels incase anyone is interested. Two of them do have a flat spot on the lip of the rim, one of which makes no difference to the wheels whatsoever but one of them once travelling over 40mph got a very minor vibration although it was minor as was on the rear. After a closer inspection it actually doesnt have any wheel weights on it either so that may be part of the reason behind it.

Anyway, here are the extra pics if anyone interested.

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/F7E83269-9EC1-4C74-8362-B8D5844F96E1-574-000000F55285F012_zps63e7ced3.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/4200662E-E351-4647-9521-B47EC1EC760B-574-000000F54C5C8B5B_zps74834dce.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/9096B7FD-3064-427A-8DBA-851B550ACA32-574-000000F559444CBA_zps3163af97.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/6F4BA751-547D-4983-A0DC-DF1470824969-574-000000F55FBBE498_zps9e405de2.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/BCE8AA36-E3E9-46B8-AE0B-16E00244CC95-574-000000F5AFB63C84_zps611026fb.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/6D005A4C-4937-4EDA-8B30-6D9D39A21E66-574-000000F5A33FDEE8_zps136a7e67.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/7A1B5134-F61B-4F4A-B8E5-61FB188BEA9C-574-000000F57E7E5F8A_zpsd9b07f7f.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/BE331A80-0CF4-459D-9CC6-EC98DB13CEE1-574-000000F5741F9C93_zps70e50d76.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/1745C55D-E9F3-46D6-8696-344406F39961-574-000000F598E4AD7B_zps1a7f78e1.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/680DB703-A22F-405A-AD07-CC894A5E2BEA-574-000000F594F47D15_zps3cdba1e7.jpg

And 2 more of the exhaust if any interest

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/72223199-CE5D-458D-9F53-5560757B1995-574-000000F5B36A857C_zpsc725cb0a.jpg

http://i1123.photobucket.com/albums/l546/Craig_Dempsey/D181E82A-D16F-4B0D-8DB2-14DE0421C262-574-000000F5C4B5C37E_zps4a51fa0b.jpg