Breaking 2004 180 Silver MK1

[M17TT180]

Got a lot done today so here are a few piccys. Offers on everything.

Large items can be sent on a pallet for around £45

Next day courier is £10

Collection is also welcomed from Potters Bar En6 (j24 of the M25) or Hadley Wood En4

Car is being scrapped now so I have left

Passenger front wing good condition £15
Headlamps £20 for the pair
Passenger tail lamp £10
Side Skirts £20
Dash £15
Gear surround £10
Heater surround £10
Glovebox £5
Heater Dials £5
Ashtray and Surround £5
180 Clocks showing just over 60000 miles £10
Steering wheel cowling £5
Under the steering wheel trim without cubby tray £5

[Stephen]

If its the car in the picture, then its Xpower Grey not silver.

Stephen

[Skillen]

If it is the xpg one, how much for the front grill?
And the spoiler?

What's the condition of the seats?
Thanks

[M17TT180]

Will pop some pics up after work and get back with some prices.

Will edit title thanks

[bowthruster]

Standard induction box if its still standard.N/s door handles front and rear?

[maxtherotti]

I did the pdi on that car!!!!!!
Was sold from New Banbury Rover/Alexance
How much for the wheels ??
Can throw in a set of bk racing wheels to keep it mobile if that helps

[petet16]

As it's a late mk1 I think it is using the Pektron bcu like the mk2, if so I'd be interested in the engine ecu, bcu, fobs, and transponder ring from round the ignition barrel.

[M17TT180]

Ok I have no idea what any of that stuff is lol, I don't do this for a living just got hold of this car as it was a good deal. People are more than welcome to come and strip bits of or send me pics of bits they need and i'll do my best. I'm not gonna be charging much for bits because I need this broke quickly so then I can scrap the shell once done.

[Skillen]

My roof has peeling lacquer, wanna strip that panel for me?
That will make you a pro-breaker ;)

[Dave]

How much for the black vertical plastic strips on the doors?

They literally unscrew from the doors, screws behind the seal on the door.

Cheers
Dave

[WalkerDnB]

As it's a late mk1 I think it is using the Pektron bcu like the mk2, if so I'd be interested in the engine ecu, bcu, fobs, and transponder ring from round the ignition barrel.

Mines a 04 mk1 and has non of the mk2 stuff I checked and it was built in 03
so double check lol

[shawny]

Is the rear anti rollbar a 20mm bar if so how much ?

[Din]

Mmmmm... you know the little coin cubby thingy on the drivers side of the dash ??

How much posted ?

[MickUK]

Mmmmm... you know the little coin cubby thingy on the drivers side of the dash ??

How much posted ?

Dammit! Mines fooked too!

[M17TT180]

Hi pics will be up tomorrow evening sorry for the delay been a crazy few days!

[M17TT180]

First post updated with pics

[M17TT180]

Skillen - Front grill and spoiler £50 plus £10 for 24 hour delivery. Grill is fine but badge is faded (like mine!)

Bowthruster - Standard ind box £15, front and rear handles (exterior i'm guessing) £15 for both, £10 for 24 hour delivery.

Dave - Door strips £10 for the pair, £8 for 24 hour delivery.

Din/MickUK £15 posted for the cubby hole thing. (Din has first dibs)

Wheel arch liners sold.

[daytona365]

How much for the gear knob and the engine cover???? Just prices as can collect..

[M17TT180]

How much for the gear knob and the engine cover???? Just prices as can collect..

Call it £20 all in.

Gord we will have to have a little yellow photoshoot!!

[Dan1971]

Oooft .... £220 for the interior. Paid a lot less delivered for mine and the bolsters were all good - that waaaas a bargain then.

If I were you - I'd get them into the yellow one. Least it'll have something going for it then .... ;) .... :fishing:

[daytona365]

Call it £20 all in.

Gord we will have to have a little yellow photoshoot!!

Not a bad idea.... You're on for the two bits.

Just need to sort out collection. Mind you with these light evenings, almost anytime is ok...

[M17TT180]

Oooft .... £220 for the interior. Paid a lot less delivered for mine and the bolsters were all good - that waaaas a bargain then.

If I were you - I'd get them into the yellow one. Least it'll have something going for it then .... ;) .... :fishing:

Cheeky git! Like I said tho if someone really wants them then that's the price. I'm not fussed if they don't sell.

[M17TT180]

Not a bad idea.... You're on for the two bits.

Just need to sort out collection. Mind you with these light evenings, almost anytime is ok...

No rush bud it'll either be here or the otherside of potters bar.

[Skillen]

Skillen - Front grill and spoiler £50 plus £10 for 24 hour delivery. Grill is fine but badge is faded (like mine!)


Sounds good to me.
I'll soirt you out tomorrow with paypal.
PM me your email address.
thanks.

[M17TT180]

Sounds good to me.
I'll soirt you out tomorrow with paypal.
PM me your email address.
thanks.

You should have pm

[shep123]

Would you split the front bumper for the splitter ? if so how much posted ?
Thanks

[M17TT180]

Would you split the front bumper for the splitter ? if so how much posted ?
Thanks

I'd rather just sell the kit complete mate, if I don't have any interest then ill consider splitting.

[M17TT180]

Also have a cupholder for sale that fits on the armrest area. Offers.

[Skillen]

Also have a cupholder for sale that fits on the armrest area. Offers.

Just a quick note on this, my mk2 has the cupholder and the mk1 didn't and when I swapped the armrests over I had to change the clips as it had an in built in spacer!
This may be needed along with this for it to close someone may be able to clarify further.

[M17TT180]

Just a quick note on this, my mk2 has the cupholder and the mk1 didn't and when I swapped the armrests over I had to change the clips as it had an in built in spacer!
This may be needed along with this for it to close someone may be able to clarify further.

No you are correct the arm fouls on the back of the cupholder. I don't want much for it but its just sitting here unused.

[Skillen]

No you are correct the arm fouls on the back of the cupholder. I don't want much for it but its just sitting here unused.

Cool well a 5mill spacer may help beneath the clip on the lid then.
Put it in yours!

[Skillen]

Also you want the payment? You started breaking?

[M17TT180]

Also you want the payment? You started breaking?

Going down tomorrow to take off the bits that have been requested. Can put it through mate although they won't be sent until Thursday for Friday delivery.

[M17TT180]

Cool well a 5mill spacer may help beneath the clip on the lid then.
Put it in yours!

Hmm I may well do that, we use a composite material here at work for making road signs so will manufacture something.

[ade-5]

do you still have the rear spoiler?

[M17TT180]

do you still have the rear spoiler?

Sorry mate spoiler sold.

[Dan1971]

Hmm I may well do that, we use a composite material here at work for making road signs so will manufacture something.

Just use a couple of washers to raise where the thing screws in. It'll work - it's what I did with mine.

[M17TT180]

Just use a couple of washers to raise where the thing screws in. It'll work - it's what I did with mine.

Want it to look factory!

[Dan1971]

Want it to look factory!

?? You don't see it though .... ??

[M17TT180]

?? You don't see it though .... ??

In my mind I will.

[Dan1971]

But you drive a yellow car - you can't be that bothered about appearances ..... ;)

[M17TT180]

:kissing:But you drive a yellow car - you can't be that bothered about appearances ..... ;)

FU

[POMPSKI]

But you drive a yellow car - you can't be that bothered about appearances ..... ;)

:yes: :mml:

[petet16]

We'd be interested in the coolant pipes, condition doesn't matter, just need to be intact for use as patterns.

[M17TT180]

We'd be interested in the coolant pipes, condition doesn't matter, just need to be intact for use as patterns.

Can you provide me with a picture of the engine bay so I know which parts you want.

[petet16]

http://www.rimmerbros.co.uk/ItemImages/Large/GRID003143.gif

It is pipes 1,2,3, & 5 on the above link, they're the hose to the top of the rad, the hose from the bottom of the rad to the oil cooler, the oil cooler to engine pipe, and the pipe from the bottom of the expansion tank.

[M17TT180]

Ok bud will have a go at the weekend

[daytona365]

You still got the engine cover? Plus any luck with your knob?? Going to Halfway at the weekend,may pop round if get time..

[M17TT180]

You still got the engine cover? Plus any luck with your knob?? Going to Halfway at the weekend,may pop round if get time..

Yeah engine cover is here, not had a chance to get down to the car, will try and get down there sat afternoon.

[evilmonkey]

if you still got em how much for

1.front fogs if they type with no cover over the bulb
2.extreme spolier

[M17TT180]

if you still got em how much for

1.front fogs if they type with no cover over the bulb
2.extreme spolier

Spoiler is gone mate. Fogs are attached to the bumper still but really wanted to sell the 180 kit as a whole.

[M17TT180]

Front bumper, rear bumper, skirts, front lights, rear lights and kenwood stereo ready to go.

Offers. : )

[WalkerDnB]

Thanks for the arch liners matey got them first thing yeasterday.
Can drive in the rain without a wet air filter now lol :D

[daytona365]

Is the engine cover still free? Still havent found the time to pop round and collect.

[M17TT180]

Is the engine cover still free? Still havent found the time to pop round and collect.

Yep and I've got the knob off!

[M17TT180]

First post updated with pics.

[M17TT180]

Come on people grab some bargins!

[Dan1971]

How much do you want for the heater surround bit - looks like its carbon wrapped - and the ashtray bit too ... ? Does the clock come out of the centre bit ?

[WalkerDnB]

How much do you want for the heater surround bit - looks like its carbon wrapped - and the ashtray bit too ... ? Does the clock come out of the centre bit ?

not carbon wrapped its factory
mine interiors the same the plastics are a blue/grey colour and the trim has a carbon effect. my car also has the full leather.

so I assume it was an option?

[M17TT180]

How much do you want for the heater surround bit - looks like its carbon wrapped - and the ashtray bit too ... ? Does the clock come out of the centre bit ?

Make me an offer, and yes the clock should come out. As walkerdnb says its a factory trim. The gearstick surround and the trim on the dash is the same too.

[Muzza]

Rear drivers side caliper ?

[M17TT180]

Rear drivers side caliper ?

They're stuck on mate sorry.

[talkingcars]

I'm after the following and can collect tomorrow (Tuesday) lunch time as I'm up to Stansted to collect Mrs TC.

Rear shelf and speakers for a saloon.
White trim panels on B pillars (the bit that goes around the top seat belt mount).
Front speakers.
Space saver spare.
Foam that sits around spare.

[talkingcars]

Also rear electric windows complete.
O/E gear knob.
Gear lever gator (don't need surround).


Still interested if they won't be ready tomorrow, just not sure when.

[M17TT180]

Also rear electric windows complete.
O/E gear knob.
Gear lever gator (don't need surround).


Still interested if they won't be ready tomorrow, just not sure when.

Only things I haven't got are the knob and rear electric windows. Don't think ill be able to do tomorrow but I am around most weekends. I'm happy for you to come and get them off yourself and just sort a bit of cash.

[talkingcars]

Cool - can't do this Saturday - will see when else I can do.

[evilmonkey]

you still got the springs for this front and back?

[pb25]

Have you got this part please?

http://www.rimmerbros.co.uk/ItemImages/Large/GRID999611.jpg

Part number 1

If you have how much posted please

[M17TT180]

Have you got this part please?

http://www.rimmerbros.co.uk/ItemImages/Large/GRID999611.jpg

Part number 1

If you have how much posted please

I guess so, where abouts is it?

[petet16]

I guess so, where abouts is it?

It's fitted into the top of the gearbox, just above where the drive shafts connect to the diff.

[pb25]

Thanks pete

Yes thats where it is!

Sent from my HTC Sensation Z710e using Tapatalk 2

[M17TT180]

Ok well I am going down to take the rear arb off at the weekend so i'll see if I can find it and get it off.

[M17TT180]

Thanks pete

Yes thats where it is!

Sent from my HTC Sensation Z710e using Tapatalk 2

I'm guessing its TXG100170 and not the other bit which is over a grand lol.

£60 new from rimmers (oos) so call it £20 delivered.

[petet16]

Here's a couple of pics to hopefully help locate it, these are of a mk2 which has a blanking cover fitted where the speed sensor would be on a mk1.

http://i4.photobucket.com/albums/y142/petet16/100_2280_zps3061166a.jpg (http://s4.photobucket.com/user/petet16/media/100_2280_zps3061166a.jpg.html)

The same thing from slightly further away

http://i4.photobucket.com/albums/y142/petet16/100_2281_zps5a17febd.jpg (http://s4.photobucket.com/user/petet16/media/100_2281_zps5a17febd.jpg.html)

[M17TT180]

Cheers pete, this is all a big learning curve for me so the more I do the more I know. Plus as its a breaker it doesn't matter if I ****** anything up.

[petet16]

No worries, posting pics of what things look like, and where they fit is much easier to follow than a written explanation.

[pb25]

£20 posted sounds fine to me. PM me your paypal address and ill get the money across and send you my address

Sent from my HTC Sensation Z710e using Tapatalk 2

[m4t3y]

Ok well I am going down to take the rear arb off at the weekend so i'll see if I can find it and get it off.

so I guess the rear arb is already reserved, right? I would take it if not, but you would have to be willing to ship it to me

[M17TT180]

so I guess the rear arb is already reserved, right? I would take it if not, but you would have to be willing to ship it to me

Sorry bud ARB has already been paid for.

[Hoopla77]

Hi do you still have the idle air control valve and the throttle position sensor? If so, and they are both in good working order, how much for the pair?

Thanks

[M17TT180]

Hi do you still have the idle air control valve and the throttle position sensor? If so how much for the pair?

Thanks

Hi have you got a pic of their location?

[Hoopla77]

Hi have you got a pic of their location?

I will try and add a pic of both tomorrow. Did the car start and idle without throttle from a cold start, as that is what I am trying to cure!

[M17TT180]

I will try and add a pic of both tomorrow. Did the car start and idle without throttle from a cold start, as that is what I am trying to cure!

No idea mate I bought it with a snapped cambelt.

[Hoopla77]

No idea mate I bought it with a snapped cambelt.

Sorry to mess you around, but I think I have resolved the issue I was going to try to fix with these two sensors.so I don't think I will need them after all. If the starting problem returns I'll get back to you.

Cheers

[M17TT180]

Sorry to mess you around, but I think I have resolved the issue I was going to try to fix with these two sensors.so I don't think I will need them after all. If the starting problem returns I'll get back to you.

Cheers

No worries bud no fuss!

[M17TT180]

Updated