View Full Version : Rave digital copy.
Jay-ZS+
06-05-13, 04:25 PM
Anyone got a link to a digital copy of RAVE? Need to change my rear wheel bearing and thought Id have a ganders before starting. Or even a workshop manual would do. My copy of that seems corrupt.
Got it on disc but my new netbook doesnt have a disc drive. :slap:
Hope this isnt a copy write issue, cant imagine MG are too fused about it now anyway.
Jay-ZS+
06-05-13, 04:32 PM
Found it in haynes, seems its an easy job as the bearing comes fitted to the hub so not need to beat them apart :)
A copy would still be handy for future use if anyone has one. :thumbsup:
I had a copy in dropbox, will see if it is still there and I'll give you the address.
Jay-ZS+
06-05-13, 04:38 PM
I had a copy in dropbox, will see if it is still there and I'll give you the address.
Cheers Kev :)
petet16
06-05-13, 04:43 PM
This one used to be free, it looks like you have to pay now http://www.mgrover-online.com/
petet16
06-05-13, 04:43 PM
180Nm for the hub nut
Jay-ZS+
06-05-13, 04:51 PM
180Nm for the hub nut
So thats about hand tight plus 55% bodyweight! :cowboy:
petet16
06-05-13, 05:03 PM
So thats about hand tight plus 55% bodyweight! :cowboy:
Approximately that is correct
Jay-ZS+
06-05-13, 05:05 PM
Approximately that is correct
With a 400mm ratchet and 85kg bodyweight its pretty close ;)
petet16
06-05-13, 05:11 PM
159Nm ?
Invite to dropbox (http://db.tt/w5bBOj1)
https://www.dropbox.com/sh/shvpz7ck390nlfm/qJxqCBFIeF
Jay-ZS+
06-05-13, 05:21 PM
159Nm ?
85kg * 9.81 (gravity) * 0.55(%) = 458.6 * 0.4(length of bar) = 183.45Nm
Can you tell Im in the middle of exams and bored of revising? lol
Jay-ZS+
06-05-13, 05:23 PM
Invite to dropbox (http://db.tt/w5bBOj1)
https://www.dropbox.com/sh/shvpz7ck390nlfm/qJxqCBFIeF
Spot on cheers Kev :D
Tried to rep you but I have to spread it about abit first
petet16
06-05-13, 05:28 PM
85kg * 9.81 (gravity) * 0.55(%) = 458.6 * 0.4(length of bar) = 183.45Nm
Can you tell Im in the middle of exams and bored of revising? lol
Well done, good answer, you passed that test:smile1:
talkingcars
07-05-13, 11:07 AM
That's neat Kev, do you mind if I drop them down?
James
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.