View Full Version : Breaking - Red Mk1 V6 Hatch
Dan1971
25-07-13, 09:00 PM
Posts here on what you're after please.
Parts will be sold to the highest bidder/offer regardless of the order of posting, but once I say it's sold to you - you'll get it.
Engine is good with 85K miles and the belts have been changed once.
Some extra non-standard bits available are -
Gunsmoke alcantara hatch interior - Sold
R 45 headlights -
R 45 Steering wheel -
Laguna splitter
Focal rear speakers to fit the hatch - sound great by the way -
Black alloys with 7mm (budget) 205-40 tyres
ITG induction - Sold
Scorpion stainless back box
CraigZS has first offer on the interior/door handles/steering wheel so they won't be sold until he sees them.
I'm also collecting my Mk2 tomorrow so the bits won't start getting taken apart until the latter part of next week and I'm no mechanic - so if the bits you need are complex to remove, I may struggle to be honest. I'd prefer you to come and collect the bits, but am prepared for the fact that I'll have to remove plenty and post bits myself as required to help you guys out as best I can - and get as much cash back out of her as I can.
So - here's the thread - let me know - but be prepared for a delay in getting the bits sorted until next week.
Cheers
maxtherotti
25-07-13, 09:18 PM
how much for the side repeaters?
o and the splitter too
Rob
Dan1971
25-07-13, 09:25 PM
how much for the side repeaters?
o and the splitter too
Rob
£30 plus postage if required for the splitter and I'll swap you for the Mk2 repeaters.
Skillen
25-07-13, 09:29 PM
Is it the itg maxogen?
How much would you be looking for for it?
maxtherotti
25-07-13, 09:29 PM
ill skip on the splitter
but your on for the repeater swap my man
Ill pm you my addy in a min
Cheers Rob
Dan1971
25-07-13, 09:30 PM
ill skip on the splitter
but your on for the repeater swap my man
Ill pm you my addy in a min
Cheers Rob
No worries - they won't be off for a while though pal unless you want to come and get them.
interior price? im interested
Can you send the bonnet via internal mail?
I'd be interested in the following should they be available:
Gunsmoke alcantara hatch interior -
R 45 headlights -
Focal rear speakers to fit the hatch
Would either of the following work on a td zed?
ITG induction
Scorpion stainless back box
Dan1971
26-07-13, 05:10 PM
I wanted offers ideally, but I'll go through the bits tonight and put some prices next to them.
In the meantime - feel free to make some offers .....
Smokey - Don't think so pal .... ;)
Dan1971
26-07-13, 06:38 PM
Gunsmoke alcantara hatch interior - £125
R 45 headlights - £25
R 45 Steering wheel - £15
Laguna splitter - £30
Focal rear speakers to fit the hatch - sound great by the way - £40
Black alloys with 7mm (budget) 205-40 tyres - £250
ITG induction - £150
Scorpion stainless back box - £60
CraigZS has dibs on the interior and steering wheel and I'm waiting for him to get back to me currently.
All above prices are before postage so that'll need to be negotiated too but collection is best and you can have a look at the rest to see if there's anything else you fancy of her, and everything is still fitted to the car so will take time. The wheels can't go 'til I've collected some others from Portsmouth.
If you need pics, let me know but everything's been photographed and put on here several times in the past.
Craig-ZS180
26-07-13, 07:37 PM
I have PM'd Dan now and have let him know my financial situation at present and have unfortunately had to back out if the interior and wheel options as at the current time it doesn't fit in for me. It would appear I jumped the gun in showing interest in the parts. Am really gutted as from what I remember seeing of the seats they are a lovely set but I can't do it at present.
Best of luck with the parts Dan, won't hang around long as some nice and tasty little upgrades there to be had :)
Is the engine complete? Also, whereabouts are you?
Sent from my GT-I9300 using Tapatalk 2
Dan1971
28-07-13, 11:36 AM
Is the engine complete? Also, whereabouts are you?
Sent from my GT-I9300 using Tapatalk 2
Yep - complete from when I drove back from the MOT station. Running really well. CM210JT - just outside Sawbridgeworth Herts.
Dan1971
29-07-13, 07:46 PM
Surprised no one fancies much to be honest. I was wary of putting prices on as I figured after I'd done that people may shy away ....
Last bump before I start ebaying the R45 bits and the renault splitter before my hols - but I'd far rather send them to you guys this week, or have you come round and pick stuff then we haggle a price .... Come on guys get some bits ....
Skillen
29-07-13, 08:02 PM
Surprised no one fancies much to be honest. I was wary of putting prices on as I figured after I'd done that people may shy away ....
Last bump before I start ebaying the R45 bits and the renault splitter before my hols - but I'd far rather send them to you guys this week, or have you come round and pick stuff then we haggle a price .... Come on guys get some bits ....
Get that 45 wheel fired on yours!
Or (if its the fat wheel) swap it for my thinner r45 leather wheel with thumb bumps and steering wheel controls?
What's the difference between the 45 wheel and the zs? I had a tf one in my Zr, loved it but too lazy to mod for my zs ;)
Dan
Dan1971
29-07-13, 08:16 PM
Nah - I actually quite like the feel of this standard ZS one on my Mk2. Seems a bit thicker than the Mk1 shiny wheel.
45 wheel is similar to the TF one, just a little bit larger, but is a direct fit onto the ZS using the MG airbag.
Mine does have the thicker bit for the thumb ..... 'Tis a cumfy wheel but I'm not interested in another steering wheel to be honest.
daytona365
30-07-13, 09:56 AM
Just come back from a break, to find you breaking the red beast!!!!!!!!!!!!!!!!!!!!!!! Im gutted..............................
Craig-ZS180
30-07-13, 11:03 AM
Dan, do you still have the original steering wheel from red from before you changed it over to the 45 wheel?
Im only looking for one as I need it to butcher a bit in honesty. No worries if not mate just thought id ask?
Cheers mate.
Dan, do you still have the original steering wheel from red from before you changed it over to the 45 wheel?
Im only looking for one as I need it to butcher a bit in honesty. No worries if not mate just thought id ask?
Cheers mate.
If he doesn't, drop me a PM :)
Dan1971
30-07-13, 12:44 PM
Dan, do you still have the original steering wheel from red from before you changed it over to the 45 wheel?
Im only looking for one as I need it to butcher a bit in honesty. No worries if not mate just thought id ask?
Cheers mate.
Yep... But l need a wheel of some sort to move around until the chassis goes
petet16
30-07-13, 01:12 PM
Yep... But l need a wheel of some sort to move around until the chassis goes
Mole Grips :pirate2:
Craig-ZS180
30-07-13, 03:21 PM
Yep... But l need a wheel of some sort to move around until the chassis goes
Ah yeah, didnt think about that one :slap:.
Only want one for the horn connector and to cut the back off to make a spacer up as dont want to ruin mine so can change back as and when needed.
Dan1971
30-07-13, 03:27 PM
Ah yeah, didnt think about that one :slap:.
Only want one for the horn connector and to cut the back off to make a spacer up as dont want to ruin mine so can change back as and when needed.
Come up and do it here if you like. So long as I have a wheel to move the car, you can help yourself to the wiring for the horn. Wheels go for about a tenner anyway - and you can have the 45 wheel for that.
M17TT180
30-07-13, 03:40 PM
Come up and do it here if you like. So long as I have a wheel to move the car, you can help yourself to the wiring for the horn. Wheels go for about a tenner anyway - and you can have the 45 wheel for that.
Dan is your wheel smaller on the mk2 than the mk1?
Jason04r
30-07-13, 03:42 PM
I sent you a PM Dan...
Craig-ZS180
30-07-13, 04:05 PM
Come up and do it here if you like. So long as I have a wheel to move the car, you can help yourself to the wiring for the horn. Wheels go for about a tenner anyway - and you can have the 45 wheel for that.
Cheers for the offer of that Dan, I still have the F wheel to try but that's why was going to cut up the back spline spacer of a "spare" zs wheel to save my oe one. If however after trying it and still no joy I think I would be saying I'd have the 45 wheel as at least then its a straight swap over and it will work on my normal coupler and bits.
If I do come to you at least it would mean the wheel would remain at yours and go straight back on I suppose. When over the near future would fit in for something like that with you mate?
Dan1971
30-07-13, 07:34 PM
Cheers for the offer of that Dan, I still have the F wheel to try but that's why was going to cut up the back spline spacer of a "spare" zs wheel to save my oe one. If however after trying it and still no joy I think I would be saying I'd have the 45 wheel as at least then its a straight swap over and it will work on my normal coupler and bits.
If I do come to you at least it would mean the wheel would remain at yours and go straight back on I suppose. When over the near future would fit in for something like that with you mate?
Any evening you want really pal, or at the weekend.
Dan1971
30-07-13, 07:42 PM
Dan is your wheel smaller on the mk2 than the mk1?
Just compared and the diameter apppears the same, but the Mk2 wheel feels thicker.
Craig-ZS180
30-07-13, 09:17 PM
Any evening you want really pal, or at the weekend.
That's cool mate, cheers. I shall speak with the boss to see what fits in best for her and the kids and will be in touch to organise popping over then mate :D
Dan1971
31-08-13, 08:26 AM
Tomorrow the engine and gearbox is coming out, and the doors and brakes etc getting stripped off.
Anyone not doing anything tomorrow is welcome to come round and help .... ;) I'll confirm times with my mate later and post up.
Engine and gearbox should be on a pallet and ready to go so I'll take offers on them and any other bits you may want, but the chassis is going next week for sure as the front's getting done the week after.
Cheers
M17TT180
31-08-13, 03:11 PM
Tomorrow the engine and gearbox is coming out, and the doors and brakes etc getting stripped off.
Anyone not doing anything tomorrow is welcome to come round and help .... ;) I'll confirm times with my mate later and post up.
Engine and gearbox should be on a pallet and ready to go so I'll take offers on them and any other bits you may want, but the chassis is going next week for sure as the front's getting done the week after.
Cheers
I'll pop over mate pick that vis kit up. Just lemme know a time.
Dan1971
31-08-13, 03:44 PM
Andy's coming over with his engine hoist, tools and enthusiasm at about 9.30 - so you're welcome any time really.
Pallet awaits ....
M17TT180
31-08-13, 03:46 PM
Andy's coming over with his engine hoist, tools and enthusiasm at about 9.30 - so you're welcome any time really.
Pallet awaits ....
Ok bud i'll pop over about 10ish, have a brew ready.
Dan1971
31-08-13, 04:03 PM
Ok bud i'll pop over about 10ish, have a brew ready.
Yes sir .... ;)
pm me your email address and I'll forward the fitting instructions for the indicator kit.
daytona365
31-08-13, 05:39 PM
Can I come and have a play?????? May be borrow a bit of your dashboard??
Dan1971
31-08-13, 05:40 PM
Can I come and have a play?????? May be borrow a bit of your dashboard??
More than welcome mate .....
you got aircon in this zed? i need an aircon pipe
talkingcars
01-09-13, 11:01 AM
It is a 180 so he should have.
Craig-ZS180
01-09-13, 12:23 PM
I too need a/c related items but not sure what exactly. Mine takes a refill and works for a while and then after a month or so the gas has gone. Not so sure if just a seal or if one of the more major parts has given up but it is annoying that its not working.
daytona365
01-09-13, 02:20 PM
Once again, the site proves its worth. One asks for help and help comes.
Great days work, engine out, calipers off, and lots of very nice tea too. Not sure what the neighbours thought of the street being taken over by ZS's!!!
Calipers stil available ?
M17TT180
01-09-13, 03:08 PM
Few more for you. Must do more of these little meet ups.
http://i113.photobucket.com/albums/n209/inda_loft/IMAG0023_zps855a8bfb.jpg (http://s113.photobucket.com/user/inda_loft/media/IMAG0023_zps855a8bfb.jpg.html)
http://i113.photobucket.com/albums/n209/inda_loft/IMAG0024_zpsb90aec32.jpg (http://s113.photobucket.com/user/inda_loft/media/IMAG0024_zpsb90aec32.jpg.html)
http://i113.photobucket.com/albums/n209/inda_loft/IMAG0022_zps1cb45ed8.jpg (http://s113.photobucket.com/user/inda_loft/media/IMAG0022_zps1cb45ed8.jpg.html)
BUTTCRACK ALERT!!!
http://i113.photobucket.com/albums/n209/inda_loft/IMAG0025_zps9319e089.jpg (http://s113.photobucket.com/user/inda_loft/media/IMAG0025_zps9319e089.jpg.html)
Dan1971
01-09-13, 04:02 PM
Big thanks for lending a hand or advice guys ... :bow:
Yep all good. Front all washed down so the engine and gearbox are on a pallet ready to sell on and a few other bits in the shed.
Calipers are front ones mate - all good and I've got a rear in the shed. The ones that are on the car at the back are fubbbarred ...
M17TT180
01-09-13, 05:48 PM
Dan I might have your mirrors off you, mine are all wobbley
Dan1971
01-09-13, 05:57 PM
Dan I might have your mirrors off you, mine are all wobbley
No worries. They are still on there as you saw. £20 ?
M17TT180
01-09-13, 06:12 PM
No worries. They are still on there as you saw. £20 ?
Cool will deffo have them. Pop over next weekend?
Dan1971
01-09-13, 06:14 PM
Cool will deffo have them. Pop over next weekend?
It'll be gone by then .... pm me that guys number please.
I'll have a go at getting them off tomorrow for you then.
Should have offered up that renault splitter too while you were over....
peterzs
01-09-13, 06:20 PM
Good days work, by the look of it.
Sad to see Red like it is, but will go, to keep more on the road!!
:yay::yay::yay:
Dan1971
01-09-13, 06:40 PM
....
Sad to see Red like it is, but will go, to keep more on the road!!
:yay::yay::yay:
It really is you know .... Gutted to be honest.
M17TT180
01-09-13, 07:19 PM
It'll be gone by then .... pm me that guys number please.
I'll have a go at getting them off tomorrow for you then.
Should have offered up that renault splitter too while you were over....
Easy to get off mate, the tweeter bit just pulls off and then there are three bolts behind. Undo these, unplug the wire and jobs done. Takes 10 mins.
Will pm you now.
Cool :) How much for the fronts ?
Dan1971
02-09-13, 07:41 AM
Cool :) How much for the fronts ?
Sold already ... sorry
talkingcars
02-09-13, 09:42 PM
Easy to get off mate, the tweeter bit just pulls off and then there are three bolts behind. Undo these, unplug the wire and jobs done. Takes 10 mins.
Will pm you now.
You need the door skin off to access the wiring plugs.
M17TT180
02-09-13, 09:46 PM
You need the door skin off to access the wiring plugs.
Door skins are already off I'm pretty sure.
daytona365
02-09-13, 10:45 PM
Door skins are already off I'm pretty sure.
Bare doors when I got there.............
Dan1971
03-09-13, 06:21 AM
Door skins are already off I'm pretty sure.
All done and ready for you.
M17TT180
03-09-13, 06:46 AM
All done and ready for you.
Top banana.
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.