allan t
16-02-14, 05:21 PM
Hi just asking about the oil pressure feed pipe for the l series brake vacuum pump.The one on my zs was leaking badly and I made a temporary repair,next the alternator packed in so I got the alternator off my scrap 400 but the pipe on it was brittle and snapped off at pump end,so I managed to drill out old union and pipe stub then tapped the hole 1/8 npt and fitted a hose tail ,cut a bit off the length of the pressure pipe,now im going to get apiece of 4mm id hose and fit from hose tail to the existing pipe,another 1 hour job lasted all afternoon. I tried various places rimmers,matty price but new pipes are scarce to come by,is it just me that has had this or is it a common fault,many thanks Allan