PDA

View Full Version : saloon boot lid


mkv6
19-02-14, 09:55 PM
Is this supposed to spring open by itself when you release it or is it just meant to release from the catch and open it yourself.

petet16
19-02-14, 10:39 PM
In theory it should partially open, but the extreme spoiler ones might not do when the springs get a bit tired, the spring position can be adjusted to give them more tension.

MG ZS STE
20-02-14, 05:49 AM
You can knock the torsion bars down to the next notch to give a bit more spring, I believe. Never did it myself as didn't have a spoiler.

They're beneath the speakers mark.

R8NMG
20-02-14, 08:27 AM
Mine has an extreme spoiler when I release the boot, it springs open by about 80mm.

adam
20-02-14, 08:38 AM
Mine makes a wee clunk and then I have to use the power of 'muscle' to open her up!

mkv6
20-02-14, 09:17 AM
Well I have sourced some gas struts from work off a daf truck bonnet so thinking of fitting them.thing is will one be enough or do I need the two.

Skillen
20-02-14, 11:21 AM
If its a trick bonnet maybe half a strut would do!

talkingcars
20-02-14, 12:29 PM
Daf grills are made of the lightest plastic ever but if you retain the existing springs you won't need much lift.

------------------
Sent from the work car park.