View Full Version : mk2 sideskirts
deano9621
20-03-14, 03:52 PM
Been trying to find a how to guide for removing the side skirts without damaging them as need to fit new clips as as some have come away,anybody can help me...cheers Deano
M17TT180
20-03-14, 04:23 PM
iirc they are pushed forwards towards the front wheel.
deano9621
20-03-14, 04:30 PM
Cheers mate,are there any screws underneath to secure them in place?
deano9621
20-03-14, 04:33 PM
And by the way many happy returns :hbd:
peterzs
20-03-14, 04:35 PM
got plastic screw things underneath.
deano9621
20-03-14, 04:52 PM
Cheers guys
They are rubbish, mine has uncllip at the front on both sides.
Can you report back how you did it?
deano9621
20-03-14, 05:32 PM
Yeah will do,when i get chance to do it,will look into it this weekend if possible,and will get back to you��
Dan1971
20-03-14, 09:27 PM
They are rubbish, mine has uncllip at the front on both sides.
Can you report back how you did it?
Ditto ....
The side skirts aren't slid on or off, the clips and brackets will either de-bond/break from the skirt, the clips are available from eBay or a Honda dealer, in theory the they should slide on or off, but they dont.
peterzs
21-03-14, 09:12 AM
Mine rusted/de-bonded, had pulled away from the front wheel. Got the clips, so thought I'd have a go.
In the end I undid the bottom screws and pulled the skirts back from the top and then cleaned it all up as far as I could. Then used a silicone sealer to stick it back together.
Few G clamps, left it for a bit and it all seems OK. Bit of a gap at the top, but when the doors are closed looks OK.
Not called bodger, for nothing.
:yay::yay::yay::yay:
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.