Leather Steering Wheel

[Malteser]

Hey Everyone,

I'm looking for a good condition leather steering wheel for my 400. It needs to have the thumb spats but no audio controls though. Anyone have or know of anyone who has?

[MG ZS STE]

Doesn't say its leather, but it doesn't say it isn't.
http://www.ebay.co.uk/itm/ROVER-400-STEERING-WHEEL-95-99-414-416-420-45-/171285576224?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27e16a7a20

[Malteser]

Doesn't say its leather, but it doesn't say it isn't.
http://www.ebay.co.uk/itm/ROVER-400-STEERING-WHEEL-95-99-414-416-420-45-/171285576224?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27e16a7a20

Saw it before but didn't send a msg asking. Did now though. Thanks!

[daytona365]

I think I still got my one from when I swapped it for the yellow one.........Check tomorrow in the daylight................

[M17TT180]

I've got a TF wheel in the garage somewhere.

[Malteser]

Doesn't say its leather, but it doesn't say it isn't.
http://www.ebay.co.uk/itm/ROVER-400-STEERING-WHEEL-95-99-414-416-420-45-/171285576224?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27e16a7a20

Just got back from them and it is the hard plastic one. :/ Thanks though!

I think I still got my one from when I swapped it for the yellow one.........Check tomorrow in the daylight................

That would be great if you could check for me!! Thanks!


I've got a TF wheel in the garage somewhere.

How much difference is there in size from the ZS to the TF wheel? Also what is required to fit it because I have heard that the indicator cancelling is off or you could cut a piece of the ZS wheel and put it on before the TF wheel and everything fits just fine but im not sure. Thanks.

[M17TT180]

Its a little bit smaller, you can either cut the back bit off your zs wheel or make something, there is a guide on here or on .org. You need the tf rotary coupler as well I think. Its mint and full leather.

[Malteser]

Do you have the rotary coupler? Do you have any pics of it and how much for it?

Also would the Standard air bag fit into it?

[M17TT180]

I'd have to dig it out the garage, the zs airbag fits but you need to cut a bit off the bottom. It was sent to me with an airbag but I know most couriers are iffy as its considered an explosive.

I don't have a coupler but its this one
http://www.ebay.co.uk/itm/MGF-MG-TF-MGTF-Horn-Slip-Ring-Rotary-Coupler-SQUIB-YRC100170-/371015605788?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item566240de1c

[daytona365]

My ZS one is in my garage, complete with its airbag......

[Malteser]

My ZS one is in my garage, complete with its airbag......

If you could post up a pic and price that would be great Daytona. I wouldn't need the airbag though, just the wheel.

[daytona365]

If you could post up a pic and price that would be great Daytona. I wouldn't need the airbag though, just the wheel.

Will take some pics today.
As for price, are you going to POL? can bring it along and its yours for a tenner.

[M17TT180]

He's in a far away land

[talkingcars]

He's in a far away land

MALT(a)ESER

[Malteser]

Will take some pics today.
As for price, are you going to POL? can bring it along and its yours for a tenner.

I don't think that I would be able to take the time off of work to do the round trip to the UK and back to Malta...lol. Also the wheel is missing the thumb spats. Otherwise I would have taken it for sure!

He's in a far away land

Yeppers!

MALT(a)ESER

:D

[Malteser]

In regards to the thumb spats, I am looking for something like this except in leather.

http://upload.wikimedia.org/wikipedia/commons/7/77/Rover_414i_steering_wheel.JPG

The thumb spats are those bumps at 10 and 2.

[Skillen]

http://i255.photobucket.com/albums/hh142/cskil/photo3_zps1de88398.jpg

Got that but it does have the audio controls :/

[Djules]

In regards to the thumb spats, I am looking for something like this except in leather.

http://upload.wikimedia.org/wikipedia/commons/7/77/Rover_414i_steering_wheel.JPG

The thumb spats are those bumps at 10 and 2.

I've got the same plastic one for spare, not the leather, if you're interested after all, and I'm living in France, so the postage cost may be cheaper than UK...

[petet16]

The part number for the one you want is QTB101470PMP, brand new ones were being sold off about 4 years ago on ebay for £25 each, I bought 2:smart:

[petet16]

A picture.

https://farm6.staticflickr.com/5521/11623120374_191695bbb5_c.jpg

[daytona365]

Ah thumbspats, not on the MK1's and I totally forgot where he lived....Was hoping he may pay for my airflight lol..

[Malteser]

The part number for the one you want is QTB101470PMP, brand new ones were being sold off about 4 years ago on ebay for £25 each, I bought 2:smart:

That's what I'm looking for!!!! I have my own airbag so it says Rover but that is the wheel I'm looking for!!!

Do you have one you are willing to sell?!?!?!

I'll even do a swap with you and send you my leather one which is like that but has the radio controls!!!

PLEEEASE!!! :w00t:

[Malteser]

Ah thumbspats, not on the MK1's and I totally forgot where he lived....Was hoping he may pay for my airflight lol..

Lol...I would have gone to you if I was to pay for an air flight...lol

[petet16]

I'm sorry I don't have a spare, the Mrs wouldn't appreciate me selling her steering wheel :laugh:

[petet16]

An xpart dealer in Holland has some in stock, but I've no idea how much they want for one.

[petet16]

http://www.mgroverpartfinder.co.uk/Distributor-QTB101470PMP---WHEEL+ASSY-STEERING.aspx?back=%2fShowProducts.aspx%3fPageInde x%3d%26part%3dQTB101470PMP%26browse%3d

[Malteser]

http://www.mgroverpartfinder.co.uk/Distributor-QTB101470PMP---WHEEL+ASSY-STEERING.aspx?back=%2fShowProducts.aspx%3fPageInde x%3d%26part%3dQTB101470PMP%26browse%3d



Contacted them. Thanks Pete!

[MG ZS STE]

The nicest steering wheel I've ever seen on a ZS/45 was noodles over on XPF.

http://forums.xpowerforums.com/attachment.php?attachmentid=12734&d=1222282740