PDA

View Full Version : Help!

M17TT180
15-06-14, 12:57 PM
I'm wiring the standard centre console in but the wire for the clock is in the way of putting the radio back in for the life of me can't figure it out!
petet16
15-06-14, 01:03 PM
The clock wire should be above the slot for the radio.
M17TT180
15-06-14, 01:06 PM
It's all part of the loom for the rest of the bits. Is the loom supposed to come from the back through the hole behind where the headunit goes as it is just loose coming up from the floor.
M17TT180
15-06-14, 01:07 PM
Never mind lol ffs there is the same connector on that loom as there is on the loom for the top 4 switches. Haha
petet16
15-06-14, 01:13 PM
Here's a picture.

https://farm4.staticflickr.com/3848/14403933176_96a374ec65_z.jpg
M17TT180
15-06-14, 01:16 PM
Yeah there are two one on the top loom with the fogs and door lock and one on the bottom loom for the atc, temp sensor. Guessing that one is for ciggy lighter as the one from my custom dash was glued in so need a new one. I was using that one didn't realise there was another one. Cheers Pete.