dsirrom
27-10-14, 11:23 AM
Regrettably for sale.
These were very recently (last month) bought by me from Dave MGT on this forum however they were not fitted to my car whilst I waited for braided hoses to arrive and now regrettably due to the very large bill I have had for other work to get the MOT done and make my new car (ZS180) roadworthy (many issues :cry: ) I will now have to sell them on without having been able to even get them fitted.
This is not the 'Brembodge' kit that others may have had fitted.
To recap, the kit consists of:
> Brembo GT2 callipers in black with white Brembo logo
> Ferroddo DS2500 pads
> 326mm discs
> spacers to fit between hub and disc
> spacers to fit between disc and wheel
> Reyland brackets to give correct offset fitting for the callipers
They fit under 17" ZS alloys wheels and I am advised that the spacers enable them to operate without issue in respect of possible contact with the bottom ball joint bolt which apparently may have been an issue with some other kits?
According to the previous owner the kit had done circa 8k miles and therefore the wear is relatively not much, as would be expected.
Prior to receiving the shock of the aforementioned bill I had already ordered a set of bespoke front stainless steel braided (road and MOT legal) brake hoses with the correct Brembo fitting at the calliper end and correct MGZS fitting at the bulkhead end. These were provdied by GBE and are excellent. I will include these along with the kit for the successful buyer.
I also have a set of longer studs (if required) although they may not be needed. Also worth noting that when measured these longer studs appear to by half a millimeter (0.5mm) too thick at the hub/bolt end (if that makes sense) although this may be down to poor measuring and is not easy for me to verify. I will throw these in anyway as part of the deal.
I need to realise as much as I can for these (for obvious reasons) but am only looking to get as close as I can to what I paid for the lot, as opposed to making any profit.
The whole lot as listed above stand me in at a fair bit over £500+
Quick sale cash to the right person for £445 ovno
My strong preference is for collection from (or fairly near - I would be willing to meet someone within a 30 mile / 30 minute drive radius) to Southampton only as they would be a lot of hassle and a great deal of combined weight to consider packaging up and posting.
If you want any photos please PM me with an email address and I will ping some over.
If you have any detailed questions about the kit then I'm not particularly mechanically minded but Dave MGT on this forum who was the original owner may be able to provide an answer (if asked nicely lol).
Kindest regards
Dave
These were very recently (last month) bought by me from Dave MGT on this forum however they were not fitted to my car whilst I waited for braided hoses to arrive and now regrettably due to the very large bill I have had for other work to get the MOT done and make my new car (ZS180) roadworthy (many issues :cry: ) I will now have to sell them on without having been able to even get them fitted.
This is not the 'Brembodge' kit that others may have had fitted.
To recap, the kit consists of:
> Brembo GT2 callipers in black with white Brembo logo
> Ferroddo DS2500 pads
> 326mm discs
> spacers to fit between hub and disc
> spacers to fit between disc and wheel
> Reyland brackets to give correct offset fitting for the callipers
They fit under 17" ZS alloys wheels and I am advised that the spacers enable them to operate without issue in respect of possible contact with the bottom ball joint bolt which apparently may have been an issue with some other kits?
According to the previous owner the kit had done circa 8k miles and therefore the wear is relatively not much, as would be expected.
Prior to receiving the shock of the aforementioned bill I had already ordered a set of bespoke front stainless steel braided (road and MOT legal) brake hoses with the correct Brembo fitting at the calliper end and correct MGZS fitting at the bulkhead end. These were provdied by GBE and are excellent. I will include these along with the kit for the successful buyer.
I also have a set of longer studs (if required) although they may not be needed. Also worth noting that when measured these longer studs appear to by half a millimeter (0.5mm) too thick at the hub/bolt end (if that makes sense) although this may be down to poor measuring and is not easy for me to verify. I will throw these in anyway as part of the deal.
I need to realise as much as I can for these (for obvious reasons) but am only looking to get as close as I can to what I paid for the lot, as opposed to making any profit.
The whole lot as listed above stand me in at a fair bit over £500+
Quick sale cash to the right person for £445 ovno
My strong preference is for collection from (or fairly near - I would be willing to meet someone within a 30 mile / 30 minute drive radius) to Southampton only as they would be a lot of hassle and a great deal of combined weight to consider packaging up and posting.
If you want any photos please PM me with an email address and I will ping some over.
If you have any detailed questions about the kit then I'm not particularly mechanically minded but Dave MGT on this forum who was the original owner may be able to provide an answer (if asked nicely lol).
Kindest regards
Dave