PDA

View Full Version : Track ready Mk1

Dan1971
17-07-15, 09:18 AM
At first glance I thought this was yours Mick ....

http://www.ebay.co.uk/itm/MG-ZS-180-Track-road-car-V6-/171860850511?pt=LH_DefaultDomain_3&hash=item2803b4774f
peterzs
17-07-15, 09:31 AM
Reckon it was after that Ariel Atom drive Dan!!!
M17TT180
17-07-15, 09:55 AM
At first glance I thought this was yours Mick ....

http://www.ebay.co.uk/itm/MG-ZS-180-Track-road-car-V6-/171860850511?pt=LH_DefaultDomain_3&hash=item2803b4774f

Just bloody do it Dan.
stamford
17-07-15, 11:46 AM
It could well be mine at some point Dan, just been notified of redundancies today, will find out Monday if selected :sad:

Username looks familiar.
ZS Phil
17-07-15, 11:51 AM
You'd struggle to get the cage and seats for the asking price so a good price really.

That said, some of the welds on that cage look a bit suspect!
SteveH
17-07-15, 05:40 PM
Powerflow exhaust sticker on bumper but a scorpion exhaust?! Not sure if the red seats and cage suit the blue colour of the car either.
talkingcars
17-07-15, 07:21 PM
Fingers crossed for you Mick for Monday, I've been there more than once and it's not good.

Love the 40 bhp gain from the exhaust and induction changes.
jaorton
24-07-15, 10:48 AM
I've always wanted my near side fog light to be for a cold/forced air feed....
stamford
24-07-15, 11:47 AM
I've always wanted my near side fog light to be for a cold/forced air feed....

Mine's been that for over 9 years ;)
jaorton
26-07-15, 01:04 PM
Mine's been that for over 9 years ;)

Nice! Did you buy a kit for it? I've got a BMC (I think) induction kit on mine and the pipe does go down by the fog light so might just be a case of getting a spare fog light and modifying it a bit
stamford
26-07-15, 01:50 PM
Nice! Did you buy a kit for it? I've got a BMC (I think) induction kit on mine and the pipe does go down by the fog light so might just be a case of getting a spare fog light and modifying it a bit

I made my own installation using the BMC CDA plus some silicon hoses. I modified the foglight mounting and made up an inlet using Marley pipe fittings! Some rivets, steel straps and araldite, still working!
talkingcars
26-07-15, 03:44 PM
I did have something on my maestro but using the indicator, I cut the front and back out of the lense but retained the bulb holder, passed an MOT but looked Heath Robinson.
jaorton
28-07-15, 09:51 AM
I made my own installation using the BMC CDA plus some silicon hoses. I modified the foglight mounting and made up an inlet using Marley pipe fittings! Some rivets, steel straps and araldite, still working!

Hummm, interesting. did you put a separate filter/mesh on the fog light to stop any large bits of debris entering and tearing the hoses?
talkingcars
28-07-15, 10:45 AM
I did on the maestro.
stamford
28-07-15, 11:18 AM
Hummm, interesting. did you put a separate filter/mesh on the fog light to stop any large bits of debris entering and tearing the hoses?

I did to start with but took it off as it blocked too easily. Never been an issue since, takes in nice gulps of air there as well but nothing to be concerned about.