PDA

View Full Version : WANTED! Mk1 ecu, bcu and key for zs180

redzed
22-07-15, 11:28 PM
Hi guys I'm after a full set of ecu components for a mk1 zs180

I need ecu, bcu, key and fob and the ignition barrel sensor.

Anyone got one to sell? Need to be in known working order.
Jason04r
23-07-15, 09:12 PM
Speak to gary husk on facebook , he's a member on most zs pages
MG ZS STE
23-07-15, 09:40 PM
isnt M17T breaking a Mk1?
Mark S
23-07-15, 09:41 PM
for the coil packs no ht leads or ht lead version - this seems to be the changeover of ecu firmware.
redzed
26-07-15, 09:34 AM
for the coil packs no ht leads or ht lead version - this seems to be the changeover of ecu firmware.

Didn't think there would be a difference
redzed
26-07-15, 09:43 AM
isnt M17T breaking a Mk1?

Who's that?
LozMachine
26-07-15, 11:20 AM
Who's that?

http://www.themgzs.co.uk/vb/showthread.php?t=29987
petet16
26-07-15, 12:20 PM
What shape fob do you have, is it the egg shaped one with the mg logo in the centre
talkingcars
26-07-15, 03:47 PM
What shape fob do you have, is it the egg shaped one with the mg logo in the centre

Pektron?
Isn't that a mk2 thing?
petet16
26-07-15, 04:48 PM
Nope, late mk1's came with the Pektron system
M17TT180
26-07-15, 04:51 PM
The easier question is 'is it a 3 button or a two button fob'
talkingcars
26-07-15, 04:57 PM
The easier question is 'is it a 3 button or a two button fob'

Yeah but some pektron cars don't have boot release so are 2 button fobs.........

:sorry:
M17TT180
26-07-15, 05:24 PM
Yeah but some pektron cars don't have boot release so are 2 button fobs.........

:sorry:

Yeah but the fob would still have 3 buttons, just one would be a blank .
talkingcars
26-07-15, 07:59 PM
Yeah but the fob would still have 3 buttons, just one would be a blank .

but is it a button? or a blank?
M17TT180
26-07-15, 08:54 PM
but is it a button? or a blank?

Its a buttonblank!:smart:
redzed
27-07-15, 06:47 AM
To add to the confusion its a mk1 track car with a engine from a mk2. So i have a old shape fey fob. As the current ecu runs fine i presume any mk1 ecu is ok, or am i right in saying i need a late mk1 ecu thats meant for the mk1s with the new engine set up with the different coil packs in?
M17TT180
27-07-15, 07:25 AM
To add to the confusion its a mk1 track car with a engine from a mk2. So i have a old shape fey fob. As the current ecu runs fine i presume any mk1 ecu is ok, or am i right in saying i need a late mk1 ecu thats meant for the mk1s with the new engine set up with the different coil packs in?

Pretty sure if you've got the older 2 button fob you just need the ecu, barrel and lock/key of the same type. Loads about, i've just picked a set up off ebay for £40 for the new project.
Mark S
27-07-15, 08:46 AM
the first digit on your ecu, make sure it matches the ecu your buying.