WANTED motobuild -35mm springs

[ZS Phil]

As title really, anyone having a clear out? Cheaper the better,they are only for a laugh on the 45 for this year's POL.

[ZS Phil]

Or coilovers if the price is right...

[Lukeus101]

Just get a grinder out Phil ;)

[Dan1971]

Just get a grinder out Phil ;)

Good call - they do it on fast n loud all the time ..... :joker:

[Lukeus101]

Good call - they do it on fast n loud all the time ..... :joker:

I was referring to the app Dan ;)

[Dan1971]

I was referring to the app Dan ;)

Wow - what will they think of next - an app that lowers the ride height of a car - amazing. :joker:

[Skillen]

That'll actually be a thing I'll bet for the air ride stuff

[adam]

Already exists, Air Lift's 3H/3P system.

[talkingcars]

Back on topic - normally I'd be dead against cutting the springs but if it's only to go to POL and back you might get away with it.

[ZS Phil]

Haha, air ride is out of the question as is cutting springs I'm afraid. One thought that did cross my mind however was machining a spare pair of front forks which would give a subtle drop and the rear forks on the dampers could be re-drilled where the bolt goes through the RCA. This would lower without any effect on spring/ damper rates. I've got a spare set of dampers in the garage... I'll look into it.

[Drew]

I don't think there is the clearance in either the front fork or rear damper for real movement.

Sent from Drew @ Roverdose

[ZS Phil]

Still looking if anybody has anything?

[M17TT180]

You can pick up civic coilovers pretty cheap

[ZS Phil]

You can pick up civic coilovers pretty cheap

The issue with them is that they are too short at the back, spring rates are miles off and are crap quality. I had them on my ZS diesel for a few weeks when I didn't know any better then fired them off for a set of GAZ.

I've got a spare set of GAZ for the race car so may just use those if nobody has anything kicking about.