My mg zs120 project

[craig-zs120]

Swapped this for a £230 pug 206sw about 6 weeks ago with mot till November.
It's had head gasket, water pump and cambelt kit + auxiliary belt and new alternator and starter motor fitted by previous owner . Needed new rear discs and pads and cv joints both sides I've now done the cv joints and new rear discs and pads coming tomorrow, but the noise I thought was due to the cv joints turned out the be the diff bearings . So fitting a gearbox that's done 60k soon.
Only mods I've done so far is fitted front fogs, led numberplate and sidelight bulbs, sprayed grilles gloss black and a performance backbox https://uploads.tapatalk-cdn.com/20170717/4f5dc80a780bef63eb07dd1d7c3fed1a.jpghttps://uploads.tapatalk-cdn.com/20170717/777519d4fe89dc358f681b3d71b4239c.jpghttps://uploads.tapatalk-cdn.com/20170717/bb33d265af1b3bd956b59d904eacea95.jpghttps://uploads.tapatalk-cdn.com/20170717/220e99abe1d95c03471397ecf25d844d.jpghttps://uploads.tapatalk-cdn.com/20170717/24215a7b6583bad39feffd5065bc67b5.jpghttps://uploads.tapatalk-cdn.com/20170717/9fb618487746e19435a68385a19e306a.jpghttps://uploads.tapatalk-cdn.com/20170717/c6a8616747e2828aa849b779d6855c42.jpghttps://uploads.tapatalk-cdn.com/20170717/236bc299a77b2ca5ebcf45dead6c7082.jpghttps://uploads.tapatalk-cdn.com/20170717/217abb5ae5bff0ed8e335c52e09b7061.jpg

Sent from my GT-I9505 using Tapatalk

[stamford]

Right belter that, nicely done!

[L30NPB84]

Nice clean looking car.

Any future mods planned?

[LukeZS96]

What LEDs did you use for the sidelights? And were they just a straight fit? I got a set from an auto factors near me and I was told they were designed to fit as a straight swap but they blew within about 2-3 weeks

[peterzs]

Looking good.

[p_b82]

nice looking car that :)

[Dan1971]

Nice one. Done some decent business there I reckon !

[talkingcars]

Hi and welcome to the forum

James

[peterzs]

Well spotted James.

:hi: good when you can do the work yourself.

must be another user name similar.

:):):):)

[craig-zs120]

Nice clean looking car.

Any future mods planned?18in alloys and wind deflectors will be fitted soon and 1.8t planned for next year

Sent from my GT-I9505 using Tapatalk

[craig-zs120]

What LEDs did you use for the sidelights? And were they just a straight fit? I got a set from an auto factors near me and I was told they were designed to fit as a straight swap but they blew within about 2-3 weeksJust eBay ones . Been for so far. I used these m8

Look at this on eBay http://www.ebay.co.uk/itm/201472333944

Sent from my GT-I9505 using Tapatalk

[craig-zs120]

Thanks guys.
Done the mk2 dash conversion yesterday and really pleased with the result looks loads better.
Got another gearbox now so I'll be fitting that today .https://uploads.tapatalk-cdn.com/20170725/56afbdc445469e38c3ab60c17027587b.jpg

Sent from my GT-I9505 using Tapatalk

[craig-zs120]

Well box changed and fitted the mk2 centre console too now and new 18in alloys and wind deflector fittedhttps://uploads.tapatalk-cdn.com/20170807/99ee67ea1cb8e68ec303a54596dd8183.jpghttps://uploads.tapatalk-cdn.com/20170807/fabf56fd4c94237f28b19de93a70b6f9.jpghttps://uploads.tapatalk-cdn.com/20170807/d20dd582c8e81c13347cdf34961ad137.jpghttps://uploads.tapatalk-cdn.com/20170807/2359df8e4fdbd2e54c9c4463752b1b17.jpg

Sent from my GT-I9505 using Tapatalk

[stamford]

You have been busy. Can't say I like the wheels but each to their own and it's your stamp on the car after all.

[craig-zs120]

You have been busy. Can't say I like the wheels but each to their own and it's your stamp on the car after all.Yes this car keeps me busy indeed lol. Not much left on the list of repairs now tho just got a coolant leak coming from the thermostat gasket so got a new stat with gasket and inlet gasket so that will be done next, then a front wheel bearing and got a dragging rear caliper to sort out then it'll be pretty much perfect mechanically. Just a small plate to weld then underseal under the car and some panels to change due to small dents that can be seen as you look down the side of the car. Yes the wheels are like marmite lol. Alot don't like them lol

Sent from my GT-I9505 using Tapatalk

[Dan1971]

Good job.


But the wheels aren't for me either ......

[p_b82]

Nicely done - I'm another with the marmite aspect being less than favourable..

But I can't quite say why exactly... I *think* they make the wheels look to big or something...

But it's not my car so it matters not what I think :D

[craig-zs120]

Nicely done - I'm another with the marmite aspect being less than favourable..

But I can't quite say why exactly... I *think* they make the wheels look to big or something...

But it's not my car so it matters not what I think :DI'll be getting the wheels refurbished probably next year may get them rechromed and black inside the spokes but not sure yet

Sent from my GT-I9505 using Tapatalk

[craig-zs120]

Here's the mk2 centre fitted and started wrapping some bits not finished yet tho https://uploads.tapatalk-cdn.com/20170809/ed903c4eade6a5f1b758ebf11babe2e9.jpghttps://uploads.tapatalk-cdn.com/20170809/417822180c9d8d80517364d395be3a41.jpghttps://uploads.tapatalk-cdn.com/20170809/bfcb5d17f8f5c2a0ddbcea32f8fd4ff5.jpghttps://uploads.tapatalk-cdn.com/20170809/8872e3f982e01b26e45c97978b941930.jpg

Sent from my GT-I9505 using Tapatalk

[Dan1971]

And it was all going so well ......