KV6 Engine Wanted

[stamford]

I'm after an engine to use as a test unit for some design work etc, I'm not looking for a runner but one that is all there would be better suited. It'll be spending its time on an engine stand. Ideally something that is not too far away either.

Let me know what's about as and when you hear of anything guys. This also includes part engines, inlet manifolds, heads etc.

Cheers.

[Jay-ZS+]

sounds intresting. It gonna be in bits on the kitchen table?!!! Or is this for your daughters zr!! That would be intresting will keep an eye out.

[idge2003]

I have a 180 on the drive which I have started to strip down! Engine was a runner clutch hydraulics went only thing stopping it starting is I managed to damage the wire from starter solenoid to starter while trying to start car in gear!

Are you after a complete assembly including gearbox etc?

Do you have a figure you are willing to pay in mind?

Cheers

Brett

[ZS]

Stamford... I have a PG1 gearbox you can have when its removed from my 180.... (got another I'm rebuilding to replace it with)... don't know if thats any use?

[afcbadam]

come on mick. what design plans do you have for it?

[Dan1971]

I'll sell you mine ... with the rest of the car for £4,500. ;0) :tease:

[afcbadam]

so he can buy another zs 180. you missing the acceleration of the zs yet??

[Dan1971]

so he can buy another zs 180. you missing the acceleration of the zs yet??

Just posted on the 75 forum ...... Basically Yes. And don't believe everything you read. :clown:

[afcbadam]

the zt 180 not cutting it then. i found that. that extra 400 kg really hurt the acceleration dont they!

[Dan1971]

the zt 180 not cutting it then. i found that. that extra 400 kg really hurt the acceleration dont they!

Nah not really. Just a bit big too, and the family and dog very rarely come out in it....which is why I bought it.

[afcbadam]

they are a big car. i didnt have the tourer mine was the saloon, but still the same length as yours but without the massive boot. you must have lasted the same amont of time as me before i wanted to come back to a zs 180!

[afcbadam]

Just posted on the 75 forum ...... Basically Yes. And don't believe everything you read. :clown:

what one shall i beleive???? the post on here or over there. lol both are opposite of each other!

[Dan1971]

what one shall i beleive???? the post on here or over there. lol both are opposite of each other!

This is home ....

[stamford]

Stamford... I have a PG1 gearbox you can have when its removed from my 180.... (got another I'm rebuilding to replace it with)... don't know if thats any use?

I swear I replied to this!

Yes will be interested.

[Jay-ZS+]

is this of any use? http://cgi.ebay.co.uk/rover-mg-kv6-engine_W0QQitemZ270388459060QQcmdZViewItemQQptZUK_ CarsParts_Vehicles_CarParts_SM?hash=item2703884590 60&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A13 18|301%3A1|293%3A1|294%3A50

[stamford]

is this of any use? http://cgi.ebay.co.uk/rover-mg-kv6-engine_W0QQitemZ270388459060QQcmdZViewItemQQptZUK_ CarsParts_Vehicles_CarParts_SM?hash=item2703884590 60&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A13 18|301%3A1|293%3A1|294%3A50


Thanks for that.

[afcbadam]

come on mick. what design plans do you have for it?

still asking the question :yes:

[stamford]

:angel::tease::sneaky::shutup2::shutup::deadhorse: :whistle:

[Jay-ZS+]

:angel::tease::sneaky::shutup2::shutup::deadhorse: :whistle:

In english?? :sad:

[stamford]

Wait and see ;)

[afcbadam]

anything to do with the inlet manifold/ vis system by any change?

keep asking guys and gals... he may crack. lol

[RudeDogg1]

lol doubt it he still aint answered me when i asked him if is daughter was fit lol

[Jay-ZS+]

lol You cant ask someone if their own daughter is fit :laugh:
I recon he going to drop it in to my zs :D:whistle:

[RudeDogg1]

y not i do all the time lol

[Jay-ZS+]

U get punched in the face much??!!! lol :laugh:

[RudeDogg1]

nope never lol cuz no ****** takes me serious lol

[Jay-ZS+]

:laugh:

[stamford]

Oi! stop hijacking my thread n00bs! :laugh:

So you want to know then..................:tease:

[Jay-ZS+]

No not intrested anymore :tease:




















Oh go on then :)

[afcbadam]

yep i want to know. see mick this is what happens when you keep us in the dark :)

[Jay-ZS+]

He'll Crack :)

[stamford]

Is it bothering you chaps? ;)

[afcbadam]

He'll Crack :)

yep he'll crack

[afcbadam]

Is it bothering you chaps? ;)

no not atall
















ok then, yes it is :)

[Jay-ZS+]

He cant tell us yet adam as he doesnt know himself!!! :w00t::p:slap:

[stamford]

Yea that's it, I have no idea! :blink:

[Jay-ZS+]

:console: You'll think of something ;)

[afcbadam]

Turbo conversion!!!!!

500 bhp without the nos.....

[Jay-ZS+]

In all seriousness just bought a headlight off that guy from the link posted seems fairly cheap and good bloke.

U still want my old ones Adam should be avaliable next weekend :)

[afcbadam]

dont think ill bother just yet james. got the cambelt change to have done soon. a rolling road, remap and road tax to pay for at the end of the month. if they dont go and you still have them when i have got over my outgoings ill take them from you. if you can sell them in the mean time though buddy dont wait about

[Jay-ZS+]

No worries mate.

Sorry to hijack well back on track... so stamford you were just about to spill the beans :)

[afcbadam]

yea come on mick, spill em








has he cracked yet james??? lol

[Jay-ZS+]

He may have cracked a while ago.. but hasnt said what his plans with the v6 are :laugh::crazy:

[stamford]

Funny guy!

Well my plans are....................................to go to bed!