View Full Version : timing tools,plenum,clutch,rear brace bar,cupholder,catchtank
XPCobra
13-06-09, 05:46 PM
All for sale to raise cash for another car, shame as the zs isn't economically fixable.
KV6 timing tools - Comes with Crank pulley holding tool and seperate adaptors for 190 KV6 engines. Used once, has light surface rust
£250 Delivered
http://i22.photobucket.com/albums/b337/xpcobra/IMG_0118.jpg
KV6 Inlet manifold / Plenum
Genuine, never used. £450 delivered
http://i22.photobucket.com/albums/b337/xpcobra/IMG_0115.jpg
MG ZS 180 Genuine Clutch kit
Includes pressure plate, friction plate, and new release bearing, also comes with new clutch release arm bushes and seal, along with new roll pin and c-clip £300 delivered
http://i22.photobucket.com/albums/b337/xpcobra/IMG_0116.jpg
MG ZS Cupholder ( the one that sits in the armrest)
£10 delivered
http://i22.photobucket.com/albums/b337/xpcobra/IMG_0113.jpg
I am away training most of next week incase im slow to reply to Pm's
Thanks
Andy, I'll have the Rear Strut Brace, call it £20 and I come and collect it!
XPCobra
13-06-09, 07:32 PM
Sorry to be gay but your third in line for the brace bar kev
fair do's, But I can collect and it will be less hassle and I'll even pay the £30 your asking for, and you dont need to bother going to the post office!
stokey-leroy
13-06-09, 10:17 PM
would the catch tank fit my 120? i dont really know what it does but have heard a lot about it? any info would be appreciated :D
vinny1979
13-06-09, 10:38 PM
fair do's, But I can collect and it will be less hassle and I'll even pay the £30 your asking for, and you dont need to bother going to the post office!
;)
afcbadam
14-06-09, 09:51 AM
would the catch tank fit my 120? i dont really know what it does but have heard a lot about it? any info would be appreciated :D
the only info you need to know......is the 120 doesnt need one, only the 180 needs it.
Jay-ZS+
14-06-09, 02:47 PM
would the catch tank fit my 120? i dont really know what it does but have heard a lot about it? any info would be appreciated :D
Sure you could fit it somewhere, Would be of no use to you though :)
stokey-leroy
14-06-09, 05:28 PM
haha worth a try i guess...what does it actually do then?
Jay-ZS+
14-06-09, 07:04 PM
As far as im aware (not sure as have the 120 too) but oil collects in the throttle body and plentum and the catch tank provides somewhere for the oil to drain to, where you can then empty out..Adam!! lol
Although I may be wrong :)
I'll take the catch tank if not sold Pete
fair do's, But I can collect and it will be less hassle and I'll even pay the £30 your asking for, and you dont need to bother going to the post office!
Sorry to hijack thread but if you need one I have brand new one 30 posted if you need it, we were going to fit to race car but ended up fitting roll cage tube instead.
Pete
afcbadam
14-06-09, 09:35 PM
As far as im aware (not sure as have the 120 too) but oil collects in the throttle body and plentum and the catch tank provides somewhere for the oil to drain to, where you can then empty out..Adam!! lol
Although I may be wrong :)
close enough. lol. stops oil vapours re-entering the engine and buggering up the vis motors/plenum/butterflies ect. this can cause some expensive failures. its not a guaranteed way to stop it, it just slows the process down, as i have recentally found out with my balance vis motor.
Jay-ZS+
14-06-09, 09:39 PM
maybe because yours is never emptied lol well I wasnt far off
Sorry to hijack thread but if you need one I have brand new one 30 posted if you need it, we were going to fit to race car but ended up fitting roll cage tube instead.
Pete
Pete, you have a PM.
vinny1979
14-06-09, 11:19 PM
lol, so my 2nd in the queue still means I get nothing. lol
thats fair...............;)
starfire039
14-06-09, 11:56 PM
harsh, but i don't think he knew who was "in line" in fairness!
vinny1979
15-06-09, 04:44 AM
lol idont mind :(
I need the clutch... but don't have £300 to spend on it at the moment :(
Sorry to hijack thread but if you need one I have brand new one 30 posted if you need it, we were going to fit to race car but ended up fitting roll cage tube instead.
Pete
Pete, you have a PM.
lol, so my 2nd in the queue still means I get nothing. lol
thats fair...............;)
harsh, but i don't think he knew who was "in line" in fairness!
lol idont mind :(
If your not fast you last Vinny!
vinny1979
15-06-09, 01:11 PM
If your not fast you last Vinny!
:horse: lol. where else can i get a brace from then anyway lol
this is my official PLEA :group:
arwilson80
15-06-09, 01:23 PM
Motobuild do the rear brace... about £30-35 IIRC.
stamford
15-06-09, 02:13 PM
:horse: lol. where else can i get a brace from then anyway lol
this is my official PLEA :group:
I got one I don't use..................yours for postage.
http://tbn2.google.com/images?q=tbn:XyvCGi7P-i5I0M:http://www.sealtite.com.au/images/product_image_265.jpg (http://images.google.co.uk/imgres?imgurl=http://www.sealtite.com.au/images/product_image_265.jpg&imgrefurl=http://www.sealtite.com.au/products/265&usg=__9qXPJ6RImaP92_m6y15eu98w2N4=&h=480&w=487&sz=19&hl=en&start=9&sig2=wKAMEmHfr3kHsyiaMdKrzw&tbnid=XyvCGi7P-i5I0M:&tbnh=127&tbnw=129&prev=/images%3Fq%3Dwheel%2Bbrace%26gbv%3D2%26hl%3Den%26s a%3DG&ei=zVY2SuDvL5OPsAb0tOnMCQ)
vinny1979
15-06-09, 05:20 PM
he he he ;)
talkingcars
15-06-09, 06:42 PM
Motobuild rear brace bar
:horse: lol. where else can i get a brace from then anyway lol
this is my official PLEA :group:
I think the clue is in the name.................
try http://www.moto-build.com/
they do several for internal fitting, one at £47, and 2 at £91.00 delivered or one to go underneath for £46.49
talkingcars
15-06-09, 06:43 PM
MG ZS Cupholder ( the one that sits in the armrest)
£10 delivered
Is this for the mk1 or mk2?
sussex_zr
15-06-09, 08:15 PM
Is the catch tank gone?
MG ZS Cupholder ( the one that sits in the armrest)
£10 delivered
Is this for the mk1 or mk2?
lol, they fit both!!!
talkingcars
15-06-09, 08:55 PM
MG ZS Cupholder ( the one that sits in the armrest)
£10 delivered
Is this for the mk1 or mk2?
lol, they fit both!!!
I might just have to go for it then, this is one of the few things missing from the car.
XPCobra
18-06-09, 09:43 PM
Motobuild do the rear brace... about £30-35 IIRC.
£47 - £48 posted
XPCobra
18-06-09, 09:45 PM
I need the clutch... but don't have £300 to spend on it at the moment :(
Pm me a close offer then, will also chuck in some MTF oil, when i sourced this clutch i had major problems trying to find it, not sure what the situation with them is now
XPCobra
23-06-09, 07:39 PM
Catch tank and rear brace bar now sold, Open to offers on the other items :)
XPCobra
03-07-09, 08:39 PM
come on people :p need the monies
how much for the crank holding tool on its own?
Drew
Pm me a close offer then, will also chuck in some MTF oil, when i sourced this clutch i had major problems trying to find it, not sure what the situation with them is now
Due to having to go through court etc for my kids I don't have anywhere near £300 at the moment to spend on the car... clutch and brakes will have to last another few months... Gearbox will (or should) be fixed asap as that is leaking again!!
Let me know how much for the MG ZS Cupholder, incl posting to the Netherlands.
Dave MGT
07-08-09, 06:26 PM
£47 - £48 posted
sod that!!!!
I got mine brand new off ebay for £20
Identical to the motobuild one
http://cgi.ebay.co.uk/NEW-Honda-Civic-92-00-REAR-Strut-Brace-Bar_W0QQitemZ350235518788QQcmdZViewItemQQptZUK_Car sParts_Vehicles_CarParts_SM?hash=item518ba9e744&_trksid=p3286.c0.m14
http://cgi.ebay.co.uk/Honda-Civic-EG-93-95-REAR-LOWER-Strut-Brace-Tie-Bar_W0QQitemZ350197650961QQcmdZViewItemQQptZUK_Car sParts_Vehicles_CarParts_SM?hash=item5189681611&_trksid=p3286.c0.m14
howmuch would it kost for you to send the timingtoolset to holland?
if the price is ok ,i'm interested.
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.