lots of zs bits, coilovers, brakes, decats etcetc

[Supercharged_Z]

Howdy Chaps.

With Deep Pain i have to free up some money, and this is the only way.


ZS Decat, had a new flexi 6 months ago - Offers

Zs Hatch Exhaust- Lovely sounding Exhaust, cat back, pictures to follow. S/S very quiet on idle and dosnt droan on the motorway etc, but sounds mind when booted. 2.5 inch bore - Offers

Inner wing filter with samco hoses from TB- Offers

ZS Avo Coilovers, sadly i rounded a grub screw to adjust the height on one coilover, it needs removing and a new one adding, but price will reflect it. height and damper adjustment - offers

ZS 180 brakes with braided hoses, ebc disks if needed (little bit of life left)


EBC rear disks with greenstuff pads, done 100 miles if that to fit 180

ZS HATCH body panals in XPG, rear bumper has a small scuff, the rest is ok, inc the front splitter.

ZS 180 Engine removed from a 51 plate car, clutch done recently.

These will be avaible in around 2 weeks time.

offers on anything of intrest.

[Southside_ZS]

Price on coilovers please mate?

edit: and the front splitter

[Supercharged_Z]

Price on coilovers please mate?

edit: and the front splitter



£60 for splitter

Avos im undecided but i was after £200 ish, there 540 new. but does need that one sorting if you want to adjust height

[KevG]

Coud you post a pic of the damage, I'm interested in them, also I gather they would be heavy so collection would be advised yeah?

[Supercharged_Z]

there comming of the car in 2 weeks, they could possibly be in 3 places

1 bedfordshire,
2 staffordshire
3 stirling if i can meet up with paul if hes down once there off.


the damage is on the ring that adjusts the heigh is a grub screw that stops it spinning, the grub screw is rounded off badly. needs drilling out

[Dave MGT]

think a couple of mine are rounded off aswell but the spring collar wont move when the weight of the cars it. I have never bothered to fit new ones

[ZS]

How much for the inner wing filter and hoses?

Also do you have the centre section of the SS exhaust??

[Supercharged_Z]

Induction kit



http://i8.photobucket.com/albums/a29/rossc0_ti/DSC00486.jpg

[Supercharged_Z]

How much for the inner wing filter and hoses?

Also do you have the centre section of the SS exhaust??



i have the center section but would rather sell with the backbox, unless your offer is sutable?

make me a offer on the induction

[Maxxed_Ross]

if anyone from ooop north wants bits picked up I'll be down that way in the coming months with ASBO

[Supercharged_Z]

nobody after anything

still got

decat
brakes
splitter
engine
all body panels


also have rear anti roll bar, and the 180 radiator which is hard to come by

Ross

[Supercharged_Z]

this car is now broken, i will have pictures of everything this weekend!!

parts ready to send out monday!!

[Maxxed_Ross]

are the brakes just the standard ones buddy?

[Phate]

Is this the Supercharged one? lol...

[arwilson80]

Is this the Supercharged one? lol...

I should hope not... :p

[Steves Cleenz]

ZS HATCH body panals in XPG, rear bumper has a small scuff, the rest is ok, inc the front splitter.

yes it is

[ZS Phil]

pics and price for exhaust please

[Supercharged_Z]

are the brakes just the standard ones buddy?

yes std 180 brakes


Is this the Supercharged one? lol...
yes it is, but watch this space
I should hope not... :p
see aboive


pics and price for exhaust please

exhaust is this one, custom job, sounds the nuts, very quiet on idle but lovely on a run dosnt drown and sounds lovley on full chat
http://i8.photobucket.com/albums/a29/rossc0_ti/IMAG0230.jpg

[weagie]

If its possilble to fit the brakes to a 120 i may be interested.

[Supercharged_Z]

If its possilble to fit the brakes to a 120 i may be interested.



yes its what people with 120's normally upgrade too.