theMGZS.co.uk  :: MG ZS forum

theMGZS.co.uk :: MG ZS forum (https://www.themgzs.co.uk/vb/index.php)
-   Build Projects (https://www.themgzs.co.uk/vb/forumdisplay.php?f=105)
-   -   180 track car project (https://www.themgzs.co.uk/vb/showthread.php?t=22733)

Cally180 24-05-13 07:52 PM

got a link to where they came from? :)

talkingcars 24-05-13 09:24 PM

You don't mention the R45 bumper ;)

Dave MGT 24-05-13 11:42 PM

Word of advise, keep a close eye on those camber arm bushes. Infact I wouldnt bother fitting them if they aren't the strengthened type. (Which there probilly not because they were cheap) They will rip straight out. Mine ripped out from normal road driving in a matter of weeks! You can by replacement bushes separately though.

Noobrider 25-05-13 06:00 PM

Car came with that bumper, it had been rear ended at some point had a rover 45 rear spoiler when I got it too but for £400 taxed and tested with 60k on the clock its fine for a track slag, its not a show car its all about having fun in it.

They're not the cheap ones, these are exactly the same ones as sold by Motobuild but because I got them from America they are sold a lot cheaper/ They are alll polybushed and of a high quality. They are used for racing so I'm sure they will be good enough for track days.

http://www.ebay.co.uk/itm/Honda-Civi...item58a06a5b85



Fitted the rest of the kit today http://i16.photobucket.com/albums/b3...psef16c5c7.jpg

http://i16.photobucket.com/albums/b3...ps2b7cf1d0.jpg

Noobrider 08-06-13 01:18 PM

Finally, got my clutch fitted so shes back up and running, couldnt do much of a test drive other than on and off the ramp as theres a dead Punto behind and I was on my own, couldnt push it.

http://i16.photobucket.com/albums/b3...psb3d61614.jpg
http://i16.photobucket.com/albums/b3...psb4bcc048.jpg

Noobrider 12-06-13 07:57 PM

new exhaust fitted http://www.youtube.com/watch?v=KsGWd...ature=youtu.be

Also fitted drilled and grooved discs plus a set of Mintex pads

Mark S 12-06-13 08:17 PM

when and where are you next out on track?

Noobrider 12-06-13 08:26 PM

Blighton park 7th July taking some customers and their cars that we built for them, then Silverstone 8th September

Noobrider 14-06-13 09:11 PM

finished all the graphics now, put it through the MOT and it only failed on number plate lights and horn...

http://i16.photobucket.com/albums/b3...ps535c640b.jpg
http://i16.photobucket.com/albums/b3...ps785cd2c4.jpg
http://i16.photobucket.com/albums/b3...ps83829b66.jpg
http://i16.photobucket.com/albums/b3...psccd301ba.jpg
http://i16.photobucket.com/albums/b3...ps872338af.jpg
http://i16.photobucket.com/albums/b3...psa942bb5b.jpg

Maxxed_Ross 15-06-13 01:04 AM

it's going to look the part going round now


All times are GMT. The time now is 04:48 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk