Some jump leads just can't carry enough current to start a V6. I have 2 sets, one is a cheap supermarket type set, very thin cables and small clips, the others are heavy duty ones that could jump a truck! Both times I've tried using the small ones they've done nothing except for get very hot whereas the big ones never fail :)
Of course it could be a weak earth, are you connecting the neg to the batter or the car's body? It does sound more like a battery / earth problem then a starter though. |
Can take a few minutes to charge up from jump leads
|
If it takes a few minutes you're probably not using the right leads or a beefy enough power supply ;)
Obviously with thin jump leads be very careful about leaving them connected for any length of time as they will get pretty hot and at worse could cause a fire or other bad things. |
What battery can go into a 180? Voltage etc?
|
As above, I need to know what battery I can use to go in my car, I am waiting to go to the scrappies, need some info peeps if possible :)
|
60/63 AH one, 12v of course. Code 063 I believe.
|
Thanks Mick,
Managed to source one from a scrappy for £15, they did say they had tested it but I did it myself anyway and it's sitting at a healthy 12.44 (ish). The CCA of my old one was only 440 :yikes: This one is 590 so should be enough. Strangely tho, the car started today with no problems which just confirms to me what some people were saying all along. Thanks to everyone, it's nice to be part of such a friendly forum ;) :) P.S. Car seems to run better, but I'm sure that's just the placebo effect haha :) |
Quote:
|
Quote:
|
I've never had a problem starting it with run of the mill leads before. I do now have some heavy duty leads so will use them in future just in case :)
|
All times are GMT. The time now is 08:29 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk