ooooooooooo lol

nice plan, something i have been wanting to have a shot at myself doing interior trim, still to do my headlining

Sorry bud couldnt help myself.

Haha, I just like having something I did myself. Watched too many pimp my ride episodes!

I will be doing black headlining and pillars at some point in the future, with a custom touch!

The older you get the less inclined you'll be to do these things, hats off to you for having a crack. I'll follow with interest. Many years ago I made a centre console for my Firenza and used offcuts from Corbeau seats to match them to my buckets I had fitted at the time.

Well it's definitely going to get MG logos embroidered on once I've done the material change. Making a start tonight!

So first section of passenger seat cover removed and my suspicions were correct! It is identical to the drivers side except for one thing. There is a sheet of strong thin plastic type material where the airbag module is!

http://i242.photobucket.com/albums/f...d/103c408e.jpg

The stitching underneath is exactly the same (no weaker on one side than the other) So I will be able to buy a passenger side cover to replace my damaged driver side...swap the plastic sheet over...and job done!

Bit of a result as the passenger sides are easier to get in good nick and cheaply!

Good result, get it snaped up as there not exactly common.

My first two stitches...

http://i242.photobucket.com/albums/f...d/dfa05e24.jpg

Done the 2 kidneys so now just need to stitch them all back together.

http://i242.photobucket.com/albums/f...d/6727f2e2.jpg