Breaking 2004 180 XP Grey MK1
 

Got a lot done today so here are a few piccys. Offers on everything.

Large items can be sent on a pallet for around £45

Next day courier is £10

Collection is also welcomed from Potters Bar En6 (j24 of the M25) or Hadley Wood En4

Car is being scrapped now so I have left

Passenger front wing good condition £15
Headlamps £20 for the pair
Passenger tail lamp £10
Side Skirts £20
Dash £15
Gear surround £10
Heater surround £10
Glovebox £5
Heater Dials £5
Ashtray and Surround £5
180 Clocks showing just over 60000 miles £10
Steering wheel cowling £5
Under the steering wheel trim without cubby tray £5

If its the car in the picture, then its Xpower Grey not silver.

Stephen

If it is the xpg one, how much for the front grill?
And the spoiler?

What's the condition of the seats?
Thanks

Will pop some pics up after work and get back with some prices.

Will edit title thanks

Standard induction box if its still standard.N/s door handles front and rear?

I did the pdi on that car!!!!!!
Was sold from New Banbury Rover/Alexance
How much for the wheels ??
Can throw in a set of bk racing wheels to keep it mobile if that helps

As it's a late mk1 I think it is using the Pektron bcu like the mk2, if so I'd be interested in the engine ecu, bcu, fobs, and transponder ring from round the ignition barrel.

Ok I have no idea what any of that stuff is lol, I don't do this for a living just got hold of this car as it was a good deal. People are more than welcome to come and strip bits of or send me pics of bits they need and i'll do my best. I'm not gonna be charging much for bits because I need this broke quickly so then I can scrap the shell once done.

My roof has peeling lacquer, wanna strip that panel for me?
That will make you a pro-breaker ;)

How much for the black vertical plastic strips on the doors?

They literally unscrew from the doors, screws behind the seal on the door.

Cheers
Dave

Mines a 04 mk1 and has non of the mk2 stuff I checked and it was built in 03
so double check lol

Is the rear anti rollbar a 20mm bar if so how much ?

Mmmmm... you know the little coin cubby thingy on the drivers side of the dash ??

How much posted ?

Dammit! Mines fooked too!

Hi pics will be up tomorrow evening sorry for the delay been a crazy few days!

First post updated with pics

Skillen - Front grill and spoiler £50 plus £10 for 24 hour delivery. Grill is fine but badge is faded (like mine!)

Bowthruster - Standard ind box £15, front and rear handles (exterior i'm guessing) £15 for both, £10 for 24 hour delivery.

Dave - Door strips £10 for the pair, £8 for 24 hour delivery.

Din/MickUK £15 posted for the cubby hole thing. (Din has first dibs)

Wheel arch liners sold.

How much for the gear knob and the engine cover???? Just prices as can collect..

Call it £20 all in.

Gord we will have to have a little yellow photoshoot!!

Oooft .... £220 for the interior. Paid a lot less delivered for mine and the bolsters were all good - that waaaas a bargain then.

If I were you - I'd get them into the yellow one. Least it'll have something going for it then .... ;) .... :fishing:

Not a bad idea.... You're on for the two bits.

Just need to sort out collection. Mind you with these light evenings, almost anytime is ok...

Cheeky git! Like I said tho if someone really wants them then that's the price. I'm not fussed if they don't sell.

No rush bud it'll either be here or the otherside of potters bar.

Sounds good to me.
I'll soirt you out tomorrow with paypal.
PM me your email address.
thanks.

You should have pm

Would you split the front bumper for the splitter ? if so how much posted ?
Thanks

I'd rather just sell the kit complete mate, if I don't have any interest then ill consider splitting.

Also have a cupholder for sale that fits on the armrest area. Offers.

Just a quick note on this, my mk2 has the cupholder and the mk1 didn't and when I swapped the armrests over I had to change the clips as it had an in built in spacer!
This may be needed along with this for it to close someone may be able to clarify further.

No you are correct the arm fouls on the back of the cupholder. I don't want much for it but its just sitting here unused.

Cool well a 5mill spacer may help beneath the clip on the lid then.
Put it in yours!

Also you want the payment? You started breaking?

Going down tomorrow to take off the bits that have been requested. Can put it through mate although they won't be sent until Thursday for Friday delivery.

Hmm I may well do that, we use a composite material here at work for making road signs so will manufacture something.

do you still have the rear spoiler?

Sorry mate spoiler sold.

Just use a couple of washers to raise where the thing screws in. It'll work - it's what I did with mine.

Want it to look factory!

?? You don't see it though .... ??

In my mind I will.