Mg zs air brake
I am currently under taking a project in where i have to construct an air brake system i plan to use the extreme spoiler of off the mg zs saloon and remake it in carbon fibre and locate two actuators inside the then hollow spoiler and mount it on the boot lid and programm it to operate correctly. i will upload pics off eork done once i am near a computer i already have a post like this on the xpower fourms.
|
if anyone wanta me to put the link up leave a message and i will.
|
Love to see it.
Sounds an interesting project, this for a Uni course??? |
Intrigued!
|
As I understand it, having been following this project on another forum for a year almost, its not going to be "functional" as if it was it would rip the boot lid off the car... lol
It is purely to show what can be done and that he can make the middle part of the spoiler swivel :) - Guess it might have moved on since I last read up on the project though! Still an interesting project... would be interesting to see some newer pictures |
you should read up on it ive moved on quite a bit planning to remake spoiler out of carbon fibre and mount onto bootlid so it will be able to be acessed and hollow the spoiler will be functionional and should slow the car down in theory. ill post the link to the xpowerfourms.
http://forums.xpowerforums.com/showthread.php?t=61233 |
Yeah I can't view xpowerforums since it has been classified as a phishing and spam site by Barracuda...
|
Quote:
P. |
u say u want an air brake?
|
Quote:
|
|
Quote:
well unless its silly monies lol. I am fitting a saloon spoiler to my hatch so it may need a little tweaking from the standard. The hatch boot could be strengthened with a frame inside that the spoiler bolts to so its not just fitted on the thin bodywork. Yes the Audi powered ZS is a totally different beast to a normal zs and with the new build seeing an even more power full motor going in stopping will be fun :bounce: beside it would be trick as F^ck:mml: P. |
well the spoiler could cost a bit it will cost me a bit but most of thats due to needing to buy a spoiler and bootlid most of it shouldnt be to costly, i can work it out for u how much my proto type will cost but if you want one it would be cheaper than what mines would be their wpuldnt be a problem with the hatch if u are willing to give some boot space.
|
It's a stripped out track car m8 which now has even more tubing / roll cage picking up the rear struts and subframe so as long as there 's still room left to get a tool box in I'm fine with that ::-)
|
There is an MGF around with active spoilers, front and rear IIRC.
|
would you want to open the boot lid ? just so i can have a ruff idea on how to nod my current design for the saloon it wont take up much space but as the hatch is as an engineer would say less stiff, but i will have a think if u provide me details or e.g spoiler height and dimentions and bootlid. would greatly help. this might cost a bit as the two actuators will cost 130 for the both but these are quick and strong.
|
Quote:
|
|
thats looks good and im not goina hate it but at times it looks juggerdy l, but all credit to the man looks like a good design would like to get talking to him but i plan to be making it completey smooth kit and sneaky parrot what do you call expensive?
|
xpowerforums updated will get all the pictures on xpower forums once i get on a computer tonite.
|
Quote:
|
mines wont be hittin the paint or damaging the body. should be a good design and hopefully one will he made for a hatch for sneekyparrot.
|
Quote:
looking forward to more updates! |
thanks hope they come out soon and i might fall off but i dont want it to. (it wont though)
|
7 Attachment(s)
below shows the pins cut to their required lenghts (made out of aluminium). the pins being turned down on the lathe. the frame and the brackets welding together although they need to be cleaned up but that will come at the end stages of the project. the diameter of the aluminium pins is 6mm and the bars that are made from steel are to be turned down to 10mm but i might be manufacuring them out of titinium.
these are the only pictures i can upload now as i have to crop all of my pictures from my iphone so that they can be posted here, will update soon thanks for all the intrest. |
the below link is a video which i posted today which has one of the two actuators showing it working.
http://www.youtube.com/watch?nomobile=1&v=P3Bl2H-zjx8 |
pictures have been posted to xpowerfourms showing limit switches being fitted. will post here tonight.
|
right firstly sorry i havent updated in a while im in a rush to get this whole thing finished and the rest of my course for the end of the year and trhe project has to be finished for the 21st of may as i am planning on going to an award competition called the BEST awards and hopefully ahve an chance at winning. I have lots of photos of what i have done, list of things that have been completed.
Full circuit wired up( actuators move up and stop at limit switches and move down at stop at limit switches all controlled by the brake light switch and the relays.) Banks( Sides of spoiler manufactured) middle to be made very soon brakets made, pins made holes cut in boot lid L brackets made to join the spoiler to the bootlid along with expoxy resin the spoiler will still have to be sanded down to give me the finish that i can best acheive with this type of moulding. i shall have all of the pictures that i have some time to transfer from fone to computer, if anyone is intrested in one pm me and i can do my best to help out |
Looking forward to seeing the finished item :)
|
Quote:
|
All times are GMT. The time now is 02:07 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk