Wanted: Cylinder heads, Valves & Cams
For my dissertation I'm looking into designing a cam-less valve train system. As such I'm on the lookout for some cylinder heads to use as a base. Dont need to be flat so maybe someone has one that has warped or cracked. I will probably end up cutting through it to expose the cross section anyway.
But it would need valves and cams then I can take all the measurements I require to produce CAD and numerical models. Oh dont have to be MG-R either as long as they are overhead cams. |
sounds mighty intresting:) 8 valve engine would have a lot bigger valves, may be easier to work around
|
Quote:
|
Is it pneumatic valves you're going for ?.
|
Dunno yet, will probably be hydraulic or electromagnet but still to finish my research on the various options
|
|
dont bmw use electro magnetic?
|
l series is an 8 valve i think? someone may have an old porous head lying about perhaps
|
http://www.ebay.co.uk/itm/ROVER-V8-3...item20cc3831a3
ideal? one for working, and one for a cutaway? |
Quote:
There are a number of as I call them Hybrid systems like BMW's Valvetronic and Fiats Multiair that although still use cams use some form of mechanical or hydraulic actuation to alter the lift or duration. What I am hoping to do is to remove the cam all together. There are a number of companies that have tried it. Believe Ricardo were/are working on a hydraulic version and Valeo had an electromagnetic setup that they were testing in two peugeot 207s. Must have 15+ technical papers on various systems and test benches that Im working my way through Theres alot of stuff to cover and the actual actuation is only a small part going to have to try and setup a system that will be capable of sensing the valve lift and the RPM or throttle postion and then feeding it back to a standalone control unit that Im going to have to program. Which hopefully so alter the lift to achieve max performance or reliability depending on situation. BMW have spent millions on it. Still its a 2 year project so I have some time :slap: |
Quote:
Kinnda fancied something alittle more modern as feel it may be more appealing to companies when I go for interviews as plan to use the project to get my foot in the door. Was looking at some of the Ford head and there are a couple of ST heads quite cheap atm, whether they stay cheap is another thing. |
saw the st heads, as you say its whether they stay cheap
|
All times are GMT. The time now is 08:21 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk