Scots/Northern Members Cambelts POLL ADDED!!
Following on from an earlier thread just though I would see who would be interested in getting their belts done. Guessing as many as possible to make it worth the fella's travelling and also as he likes to have jobs, some in north sassenach land for the return home:) *NOTE* This is only to gauge interest, I have not spoken to said technician. As for dates well put down when your belts are due and we will see what would be best:)
:Edit: Maybe add if your wanting waterpump doen as extra:) 1) Gary (Maxfly) KV6 Belts due June 2010 + Water Pump 2) |
1) Gary (Maxfly) KV6 Belts due June 2010 + Water Pump
2) Graham (Grimmy) KV6 Belts due October 2010 |
1) Gary (Maxfly) KV6 Belts due June 2010 + Water Pump
2) Graham (Grimmy) KV6 Belts due October 2010 2) Alan (arwilson80) KV6 Belts due July 2010 (or 7.5k miles) |
1) Gary (Maxfly) KV6 Belts due June 2010 + Water Pump
2) Graham (Grimmy) KV6 Belts due October 2010 3) Alan (arwilson80) KV6 Belts due July 2010 (or 7.5k miles) 4) Kevin (KevG) KV6 Belts due June 2010 |
I have mentioned this to Russell to gauge his response and to get a price check due to the travelling involved. I did suggest a non-returnable deposit to ensure everyone who has shown interest does not let him down as this is a long way for him to travel.
Anyway I shall leave that for him to decide. |
1) Gary (Maxfly) KV6 Belts due June 2010 + Water Pump
2) Graham (Grimmy) KV6 Belts due October 2010 3) Alan (arwilson80) KV6 Belts due July 2010 (or 7.5k miles) 4) Kevin (KevG) KV6 Belts due June 2010 4) Tony (Tony10) KV6 belts due summer 2010 (not at home so cant check!) I Pre empted this Garry and emailed Russel yesterday to guage interest but no reply yet ill pass any reply on to you! This would be great if we could get this sorted out! 5 of us all ready! |
1) Gary (Maxfly) KV6 Belts due June 2010 + Water Pump
2) Graham (Grimmy) KV6 Belts due October 2010 3) Alan (arwilson80) KV6 Belts due July 2010 (or 7.5k miles) 4) Kevin (KevG) KV6 Belts due June 2010 5) Tony (Tony10) KV6 belts due summer 2010 (not at home so cant check!) 6) Norman (Nor) KV6 belts due in December 2010 |
Quote:
Quote:
|
think he would stop off in newcastle on the way :)
or do them the weekend of the scottish mods show? |
Quote:
We can only ask fella, see what he thinks works best for himself i suppose:) |
whats the mileage/age these need changed again? And I suppose it can be done before due time
|
Quote:
|
Most of the 180's listed will probably be under 90k, so age comes first!
|
Quote:
|
Aye, mine just turned 30k the other day.
|
Quote:
" Hi Tony, Sounds like a plan, if there is that many of you plus more needing the belts done I would come up for as many days as it takes. If you could give some idea when this could take place so I can make arrangements etc. Group price would be no problem and I'm sure you it will be to your liking. Best regards Russell " |
Thats good news..
We need to get a time and a place, more importantly an under cover place like a workshop etc, so that work can be carried out, with relative comfort for Russell. If anybody knows of any workshop place that can be hired for say 5-7 days then please let us know. |
I cant see it taking that long. I though mick reckoned he could do a kv6 in a couple of hours.
|
Approximately 4 hours.
|
i would be interested in getting belts done,but i think craig got then changed at 60,000,is this the right ones,guy a got car off wont post timing belt receipt down!
|
Quote:
aye craig got em done so your ok for a wee while yet:) tho the guy who sold it to ye should post the receipt down!! |
1) Gary (Maxfly) KV6 Belts due June 2010 + Water Pump 4Hrs
2) Graham (Grimmy) KV6 Belts due October 2010 4Hrs 3) Alan (arwilson80) KV6 Belts due July 2010 (or 7.5k miles) 4Hrs 4) Kevin (KevG) KV6 Belts due June 2010 4Hrs 5) Tony (Tony10) KV6 belts due summer 2010(not at home so cant check!) 4Hrs 6) Norman (Nor) KV6 belts due in December 2010 4Hrs So far 24hrs worth of work listed, so you could say 3 days easily for Russell to be up:) |
Well a (long) weekend would suit me best as i'll need to factor in a ferry crossing...
15th May is out, but 18-20th March would be good as i've already planned to take those days off anyway. ;) And i'll deffo be there as mine is only 7k off the 90k. :) |
Well the wkend in march is a no for me as its my B'day. I think may would a be a good month.
|
March is totally no use to me as i won't have the cash to get the belts done then after forking out for the clutch.June July would be much better.
|
Quote:
Quote:
Quote:
|
Don't mind getting mine done a couple of months early if it's going to mean a good saving, but can't afford to be getting it done 9 months early.
|
Quote:
|
so looking june/july time as what suits most?? Thats sound with me as money is tight in this area also the now lol:D
|
I can probably do June - But not after the 28th as i'll be headed West...
|
Will I suggest June to Russel? Also have we got a location yet? would Dreadnaught be interested in helping us?
|
I have emailed Russel! See what he comes back with for the month of June!
|
Tony,
What about contacting Dreadnought, and see if they are available. |
I dont really know the guys there at all. I have spoken to Paul twice when I was trying to buy the black MG he had there this time last year. Does anyone have any other deas? I dont think a comercial garage wouls really give over the space to us.
|
A 'rally service tent' and line them all up on Lochside Road. :)
|
Didn't someone up that way have a collapsable XPower gazebo?
|
Allan I think we use Mrs H drive. I hear you have booked your accomidation? I will happily speak to my parents and see if there is any objecion to using our drive and garage. However would folks really want to travel up to Montrose from central blet. And would Russel want to travel that far as well?
|
If it suits for it all to happen up that way then yeah i guess you could say accomodation is booked. :) May as well pop in for a bit seeing as i'll be gone in less than a month after that.
|
Heard anything further on this?
|
belt
i need mine done asap as it a 2001 (Y) WITH 58K on the clock what sort of price we talking bout 1st as ive had a good quote by a place in coventry
|
All times are GMT. The time now is 10:57 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk