Back Box for my ZS180
 

Hi
Fancy something shiny and pretty with a bit of a tone for the ZS. Nothing too noisy. Whats best? Like the XPower ones but they seem pretty rare. Anyone got anything?
JB

Give Ralph a ring at Executive Motoring Services. 01634 388999. He should be able to help you out with choices and appropiate selection.

Check out the link in my sig below to visit the website for a browse....

I have a Piper cat back system with a 3" outwardly rolled tailpipe but there are lots of other options.

Smitten Jim

if ems havnt got anything you like there are some x power ones on ebay from 'the z warehouse '

We can supply the XPart XPower or Janspeed XPower back boxes.

My friend has a Cobra 4" slash (almost identical to the one I had on my ZR) and it sounds fantastic! Perfect balance of bass and burble for the V6

What sort of price am I looking at? Will it grease any wheels if i become an official supporter?

Any pics?

i got a scorpion backbox on mine when i got it, its very quiet, i dont rate it at all. Im changing it for a twin exit in the new year.

There's only one back box................well cat back :laugh:
Janspeed ;)
http://i98.photobucket.com/albums/l2...estrearend.jpg

4" slashcut jap back box on mines a piper makes a superb noise fills the heatshield nicely as well

http://i168.photobucket.com/albums/u...3/SP_A0218.jpg

Here's my old ZR one :smart:

http://i34.photobucket.com/albums/d1...R/DSCF1143.jpg

http://i34.photobucket.com/albums/d1...oss_MGZR_2.jpg

and the ZS

http://i34.photobucket.com/albums/d1...S/DSC_1119.jpg

sorry the last one isn't that fantastic :unsure:

Ahhhhhh choices choices.
Like the twin exit Janspeed however, looks expensive. :ohmy:
Not sure if I want full on Jap as they normally come only in LOUD mode :shutup2:
Cobra looks nice. Looks like a good fit and fills the shield nicely.
Still kinda hankering after an XPower one though.

the Cobra was a custom job, you ask for what you want and you get it!

I asked for it to be really bassey around town but quiet on the motorway... and I got it. Only thing was it got a bit droney above 70, but you get used to that.

Should sound fine on a ZS

We can also fit the Janspeed duplex exhaust ;) We've done quite a few of these now.

How much is the Janspeed? Long way to go to Kent to get an exhaust fitted. lol

heres a couple to look at

http://cgi.ebay.co.uk/MG-ZS-180-DUAL...QQcmdZViewItem
http://cgi.ebay.co.uk/ROVER-MG-ZS-18...QQcmdZViewItem

First one is £500 :nugget: Can't justify that.
Second one doesn't work.

I have the X-power supplied by EMS. Terrific burble, but not to intrusive..love it!!!! :w00t:

so mine is a powerflow and is a letterbox style fits the heat sheild very well and sounds so good was a bit louder on the 120 and has a different pitch on the 180 that its on now still love it was about £350 and is a cat back system all custom built for the car ..

http://i159.photobucket.com/albums/t...Picture012.jpg

http://i159.photobucket.com/albums/t...icturea006.jpg

need to get some pics of it on the 180 now,,

How much was it if you don't mind me asking. Just a rough figure obviously i will need to tak inflation into consideration.

Looks nice Chris. Our local powerflow lot are hopeless! However, longlife might be alright i guess

i got mine fitted art extream in harlow essex but they have since closed down and i had to get it swapped in st albans hertfordshire they didnt seem as good as extream but all they had to do was swap it over they still wanted £100 to swap it though oh well at least the warrenty still is ok

Don't but that duplex system from eBay! We can do it significantly cheaper than that...

SS, I've sent you a PM with the prices for the 3 systems that we normally fit. Please don't publish the prices here ;)

Thanks mate have replied.