Plans for your ZS in 2008?
 

Well here are my modification/repair plans...

EXTERIOR

new bonnet, bonnet bulge and respray (EMS Ltd)
mk2 rear bumper and respray STARTED 28/3
fit laguna splitter to front bib
refit rear windscreen rubber thats fallen out
remove dents and scratches where possible
fit mudflaps to front of the car
McGard locking wheel nut kit (EMS Ltd) DONE 21/3
polish, wax and seal bodywork (Express Valeter) DONE 11/4
fit personalised number plates
fit MG and ZS180 badges
fit St Georges cross badges under side repeaters
tint rear windows limo black and light front tints
fit 4Kam onto car

INTERIOR

fit monogram steering wheel DONE 21/1
replace blown dash bulbs DONE 21/1
clean headlining and carpets (The Express Valeter) DONE 11/4
spray dash and door trims in silver (Wilko66) DONE 13/1
fix stupid gearknob gaiter DONE 13/1
buy and fit ICE into car (Wilko66 & Carmadbaker) DONE 11/4
front seats retrimmed (Wilko66)
fit 4Kam into car

ENGINE & GEARBOX

oil catch tanks to fit (EMS Ltd)
BMC CDA induction kit (EMS Ltd)
stainless steel de cat/Piper sports cat
Quaiffe diff fit to low miles gearbox (Rally Matt) DONE 2/6
poly bush the gear linkage

BRAKES & SUSPENSION

Wilwood big brake conversion kit (Intelligent Tuning)
Supaflex poly bush the suspension (Silverstorm Auto Developments)
GAZ/LEDA coilovers (EMS Ltd)
Motobuild lower brace bar (Motobuild)

WHEELS & TYRES

Motorsport wheels 17" x 7.5J" 5 spoke or multispoke
Clio Cup 200 R17 slick tyres

and my main aim......enjoy driving the ZS on as many track days as possible and maybe start sprinting it :D

Jim

What are yours peeps?

EXTERIOR

fit various small XPower graphics
new wheel nuts
polish out all the swirls in the paint
fit personalised number plates (hopefully)
fit Saltire badges to rear C post
fit alloy front MG badge
cut out air ducts in front bumper
HID or Zenon full beam bulbs
get tint sunstrip

INTERIOR

fit TF mirror (possibly)
fit starter button (possibly)
spray dash and some trim blue
new MDF boot floor
fit ICE from the ZR - sub + 2 amps
upgrade speakers all round

ENGINE & GEARBOX

oil catch tank to fit
Pipercross induction kit to fit in the wing
custom cat-back with twin XPower back boxes

BRAKES & SUSPENSION

paint callipers blue and apply XPower stickers
Mintex brake pads and disks all round
Eibach XPower springs (possibly)

Mine will be slow as usual, kids-budget etc!

EXTERIOR

Blue LED sidelight bulbs-I'll have a look first.
St George/chequered badges to fit.
Beadblast & powdercoat wheels.
Fit rear wash/wipe.


INTERIOR

Looking at the TF mirror.


ENGINE & GEARBOX

Fit the oil catch tank.
Repipe the BMC CDA using silicon hoses and stainless pipework.


BRAKES & SUSPENSION

Strip and clean the current ones.
Lowering springs would be nice.

Not much planned for me.

Some coilies
Poly Bushes
New wheels
Engine conversion??????

Shroon

Not much for me... and all are maybe's

Induction Kit
Remove front tints & sun strip for MOT :(
Scangauge
Paint calipers & Xpower stickers
Maybe an exhaust , but that all depends on the current one...

Jim - What is 'fit 4Kam into car'? Just a video cam kit?

Yeah its a camera for track days and doing some rallies I thought that it would come in handy.

http://www.4kam.com/action_rally_package.htm

Jim

well for me, my plans are

EXTERIOR

Fit mud flaps
Paint Calipers + Fit XPower Stickers
Fit Alloy MG Badge To Front Grille
Upgrade Headlamp Bulbs


ENGINE

Fit Catch Tank
Fit Induction Kit
Upgrade Back Box (If original gives up ghost)
Uprate VIS Actuators
Possibley Uprate Clutch Master/Slave
Fit VIS Indicator Kit


INTERIOR

Fit Start Button
Change My Knob:D
Fit TF Steering Wheel

Thats it for now, though interested on stamfords fitting of rear wash wipe!!! Also the illumination round ignition, sounds good to me:)

When Ralph and I looked into it......it is likely the wiring loom is there......but the bulb and its holder may not be.

Quite how involved this job is I dunno.....maybe I should put a post up in the interior section :hmmm:

Jim

No..! ...oh no, not one of those silly scooby style mods? :morepics:

Nope we are talking about Ralphs unique MG Sport & Racing bonnet bulge as found on his ZS180. Look in the members cars section for EMS Ltd to get a better look ;) we are working on this right now for a small run of these to be made as and when required. My car will be the guinea pig for this and pictures will become available when it is completed......probably by the summer so watch this space -> [ ]

Jim

I did a rear wiper conversion to my Firenza, was a great mod. Got a Corsa one in the garage, offered it up but not quite the right shape, so it is one of my 'to do' jobs when I go scrapyarding sometime.

exterior

front bibdone
front fog lights done
x power exhaust done
george cross/ chequered flags, sorry stamford :joker: done
paint calipers........this week maybe (Done 15/1)


interior

done most of what i wanted maybe paint door handle surrounds to match dash, well maybe a jim :D

engine

repipe induction with silicone and painted pipes done
paint cam cover done

Re: St George badges: That's alright, got mine before xmas, not sure where to pop em yet, but Craigs idea on the spoiler uprights look good!

Oh yes bud I am well happy with my dash and console you have sprayed :D thank you! :D I will post up some pictures in my 'Members Cars' bit and update it later ;)

I reckon the door handles would look good sprayed too :) we shall see!

Painted cam cover..........oh yes! a must! :D

Jim

i saw some on ebay and thought they look good:clap:

ah yes I forgot!

I would put mine under the side repeaters.........thank **** I never got the Norwegian ones made up and put on the car :laugh:

Jim

Pretty boring but

Light smoke tints all round
Possibly Mk1 rover 45 headlights
Fit pioneer X1R and Cd changer

And give the car a proper service ( oil, oil,fuel, air pollen filters, new cambelt and tentioners new spark plugs, coolant flush and change new wipers, new gearbox oil and new mintex discs and pads all round) and repainting the calipers black

Generaly fixing anything thats not perfect aswell

Yea, that would have been a real stinker Jim!

Yup..........she still unblocked me......and just watches my movements..........she won't engage in any convos :laugh:

Past caring........I guess.........she must still be stewing......on what I don't know but its not for my attempts to try and find out and help her out.

All I get is 'Hope you have a really good big dinner!'

:rofl:

Jim

EXTERIOR :

18" Momo's or Konig alloys
Xpower springs
Minor dents to be repaired

INTERIOR :

Leather handbrake and gaiter
TF interior mirror
12V socket in boot
Heated seat conversion

ENGINE :

Superchipped
Mashers inline catchtank
Janspeed Manis or Piper 270 cams - can't afford both, probably can't afford either !

17" Alloys
Xpower lowering kit
Colour code door cards and trim
Induction kit
Fit new rotary coupler
Black lexus lights

No plans for my ZS this year. However, if a suitably cheap donor car turns up... :D

In the meantime, I'll make do with emptying Jim's wallet :joker:

:p

sorry guys my plans for the zs are to say goodbye on tuesday scrap scrap scrap......

then some work on my ford focus st3...

i know it wont be popular but didnt want to do the z back as so many problems last year so putting a line uner it and new house, new job new car new life....long live 2008 i hope.

Everyone can understand that dude. Good luck with the Ford and putting your life back to some kind of normality ;)

Jim

jim when i get the st i will make it to a kent meet..........

You are quite welcome buddy :D

We all want to have a chance to point and laugh :joker: kidding! :D

I think had I not have been driven by my Brother who was into Rovers twice now and me driving his little 214is and 45......I wouldn't have given the MG Rover marque much of a look.

Jim

well heres my list:

Exterior:
Rear extreme spoiler - all planned and ready
new rear lights - got em
give the paintwork a good polish - it got loads of swirls
refurb the alloys
maybe a twin exhuast exit from ptp
oh and some decent bulbs lol

Interior:
Heated seats
Leather retrim from Neo - including rear headrests
New head unit - including sub n amp in the boot
fix the sqeaky clutch pedal

i think thats enough to be on with this year.... lol

Engine
Chip to be fitted.
Plastic covers, sanded smoothed and painted
Fit catch tank
Check clean and resolder vis valve actuators
Check and fix gearbox problem :(
BMC Filter

Exterior
Polish and clean it
Replace front alloy that is badly kerbed
Laguna splitter (maybe)
A couple more small Xpower details

Interior
Good clean
MG Mats
PC Install

Chassis and Running Gear
Xpower Springs (maybe)
Polybushes (maybe)

Some more likely than other especially where money is needed. (Thats all of it aint it)?

As ive just got my car and its not old,i dont think ill be doing to much,i dont want to catch the bug yet

Interior:
Fit my Alpine Headunit+cd changer in? most likely boot

Exterior
Wash+polish
Find something good to clean the wheels i hate cleaning them lol
Needs a good clean inside

Forgot to add that I'm keen on a Cupra splitter once the bodykit is done.

is that a red spoiler i see on a green car???

Well where do you start....

Only had it 6 weeks and have added an xpower backbox and transplanted my pioneer avh5700dvd into it but once I get the leak sorted (changed the stat housing, temp sender unit and all pipes/orings today, all sorted thanks to Lates....


Parking sensors (having read the great how to on here, 23 quid and an hour to do!)

START BUTTON....dunno why just gotta have one..:mml:

Wheels refurbed (was gonna be hypersilver but now I've seen smokeys white ones.....hmmmm)

Site Stickers !!!!!

Might debadge the back...?

Might try and find a trim shop and have the door cards retrimmed with blue alcantara to match the seats..

Like the tf mirror mod...

Like the TF steering wheel...


Finances/time dependant on all the aforementioned :sad:

I don't think anyone can get hold of the TF steering wheels in blue anymore iirc......

Silver is a maybe......hmmm check on ebay or with Ralph at EMS Ltd. You will need an adapter to fit the TF steering wheel onto the ZS spline......read elsewhere on the forum about that using the search facility.

Jim

Blues ones as rare as the proverbial rocking horse...I had a range rover walnut/leather wheel recoloured last year by a local refinishers and it looked as good as new...was thinking about getting a lighter one (silver/yellow) and getting the leather stripped back and refinished..gonna give em a call to see if they can do it...will post back if they can cos i know alot of people would love a blue one !!

You aren't wrong!

Jim

Got some important ones done today that needed doing.......now my dashboard is finally back together :D

Jim

Right.........we are a quarter of the way through the year already :w00t:

how far have peeps got in crossing items off their lists?? I am doing quite well.......and have changed my list a little too :D

Jim

Bought a Type b diff(not on list) Coilovers should be in the next month or so


Shroon

My biggest plan is simply to keep it !

I change cars too often. Have pledged that if I hold on to this until I'm 40, just under 3 years, I'll get something extra special. Trouble is that if I do the following, I'll have something extra special :):)

Exterior.
My handles are getting done on the warranty.
Union Jack for the roof still in the box, but is going to go on at some point this week as I'm off.
Got a few scratches and chips so might look at sorting them.
My bumper at the back, looks dull compared to the body. I reckon it's had a dink but not been repaired very well. Might look at a once over paint job .... costly though.

Interior.
Have had my eyes open for Alcantara leather interior to come up on a fleecebay...but no joy. I know EMS does them, but when they'll cost me £750 ish, I might look at a full leather re-trim. Maybe in grey ....

Engine.
My car is fast as feck anyway .... so I'm fine just now.