Nuts....
 

Just a quick silly one.....

Anyone fitted aftermarket wheel nuts they would recommend? Plenty out there but experience tells me there not all that good...

Genuine from Rimmer bros are £11 each! Need 8 and think 88 quid is a bit much!! :hmmm:

Buy a used set off a breaker on eBay bud you'll get a set for under a tenner easy

I have Mazda nuts on my wheels.had them for years and no problems.

^^^this, they are a bit bigger so just mind and have a suitable wheel brace. They are much better as they are solid so don't fall to bits like our standard ones sometimes like to do :)

Cheers chaps. Any particular model Mazda and when you say bigger presume you mean actual size as opposed to the shoulder size?

Iirc they are 19mm Simon And standard are 17mm?!? I believe any model is fine.

Any nut with a 60 degree taper to fit a M12 x 1.5 will work.

I normally use a 19mm socket on my wheel nuts, the Mazda 6 uses 21mm.

There are some options from my ebay search for 19mm 60 M12 1.5 - http://www.ebay.co.uk/sch/i.html?_fr...2+1.5&_sacat=0

Ahha, in that case ignore my sizes And go with the above.

Cheers guys

sets off e-bee are ok,as mentioned 60 degree are a must,got set for zr 18 month ago,still good.set with non self destruct lock nuts on zs now.chrome on dark wheels mean leave centres off.