theMGZS.co.uk  :: MG ZS forum

theMGZS.co.uk :: MG ZS forum (https://www.themgzs.co.uk/vb/index.php)
-   General Discussion (https://www.themgzs.co.uk/vb/forumdisplay.php?f=14)
-   -   Window Motors (https://www.themgzs.co.uk/vb/showthread.php?t=9192)

SheppeyTrio 19-08-09 08:27 PM

Window Motors
 
Can anyone plz tell me if the drivers side window motor is supposed to go up all the way on it's own, as it goes down!

Also, my drivers side window comes down in 3 stages? Is this right or is it supposed to go down in 1 sweeping movement?

LoL, also, can the passengers side be done so it operates like the drivers side??

Thanx for reading hope someone can help!!

:clap2: :bounce: :thumbsup:

rbull51 19-08-09 08:53 PM

The drivers window should go down all the way in one touch of the switch but on the way up it stops as soon as you let go of the switch. Try using some silicone lubricant in the runners, i did and the windows are 100% better.

talkingcars 20-08-09 10:00 AM

On my early mk1 the when you press the switch down lightly it lowers until you let go. If you press harder you feel a click and it drops automaticly. It is controlled by an ECU in the door.

I guess you'd need to get the ECU and the auto switch to make it work in the passanger door and then customise the wiring loom to work.

Until recently my drivers door auto function wasn't working as the screws that hold the switch in place were not holding due to the threads in the holes wearing, I took 1/8" of the back of the screw holes on the switch to let the screws go in further and hold, now the auto works.

However, proberbly due to a lack of maintance by the P/O (it was a main dealer serviced car from new!) I've always had a problem with the window wobbling in the guides so when it is raised the top rear secion comes out of the runner, I have used a peice of wood to reduce flex in the front runner which has mostly cleared the problem but at the moment the glass sticks at about half on the way down on auto.......................

will-w 20-08-09 09:31 PM

I have the same problem with my mk2... Pressing it once moves it down about 80% of the way, then it stops... Pressing it again goes to 90%, and again to 100%.

Yet if you hold the button down it goes all the way down in one go!

Am going to try and grease the runners up and see if it makes a difference! :)

Marky Mark 20-08-09 09:40 PM

Same here Will with the Mark 1, if you hold your finger on the button harder it tends to go all the way down, but temperamental, a definite grease up required!! :)

RalphG 20-08-09 09:45 PM

The only MGR car that had the one-shot up and down on both doors was the 75/ZT.

SheppeyTrio 21-08-09 05:46 AM

Quote:

Originally Posted by EMS Ltd. (Post 117353)
The only MGR car that had the one-shot up and down on both doors was the 75/ZT.

That would be the car my brother's just bought!!!

RalphG 21-08-09 03:13 PM

The 75/ZT windows can be programmed via T4 to have one-shot down on both sides. The one shot up can also be programmed.

talkingcars 21-08-09 06:04 PM

I thought the mk1 213 and 216 had one shot on both sides if electric windows were factory fitted.

SheppeyTrio 21-08-09 06:25 PM

Quote:

Originally Posted by EMS Ltd. (Post 117407)
The 75/ZT windows can be programmed via T4 to have one-shot down on both sides. The one shot up can also be programmed.

So can the mk2 ZS windows be programmed to go down in 1 go and come up again in 1 go??

:bike: :mbounce: :rofl:


All times are GMT. The time now is 01:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk