25mm lowering
Has anyone got a pic of car thats lowered 25mm please
|
Any car, or just a ZS?
|
Zs
|
Ive got the 25mm lowering spings on my zs put the backs on first with the tight wound coils on bottom come to do fronts and they fit on with the tight coils at top so im guessing the backs need to be swapped round
|
25mm lowering springs
1 Attachment(s)
https://www.themgzs.co.uk/vb/attachm...1&d=1664278053
Seems alot lower on front and to high on rear cant be right is there anything other than springs n shocks causing this as they are new |
Things will take a while to settle if they're new & they'll drop a bit.
but iirc the front/rear gaps are different on stock - it just looks more obvious when it's lowered. I think mine were adjusted so that it wasn't "as bad" front to rear. (but I had the front so low I got occasional rubbing on the wheel arch) |
1 Attachment(s)
|
Quote:
|
I cant see it making much difference but somthings not right -25mm shouldnt put the front wheels in the arches with the back end not looking much different
|
Are they for sure on the right end of the car? Something I'd probably do...and just a thought If they are not clearly marked.
If you think maybe the front is too low and the rear too high, as I expect the front will be stiffer with the weight of the engine.....? |
All times are GMT. The time now is 08:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk