switches
 

Can someone help me I'm replacing the air/con ,rec/air,heated rear screen, and hazard switches on my mk1 ZS 180 with savage led switches. really confused in the wiring of them tried a couple of goes and just blown fuses so don't want to risk doing damage ,trolled through how to's and searches on net but no results, anybody guide me in the right way to do this in what wires go where or maybe a dummies guide to wiring switches or diagrams Cheers ...

I would have thought it was straight forward, accessory wiring on one side of the switch and power supply to the other. Do you not have a wiring diagram to trace the correct wire colours or at least a test meter or bulb?

Put up some pics of the switches mate. I rewired mk2 switches with momentary switches. The wiring was a pain as most switches had 4 or 5 wires coming from it!

Just searched for Savage switches so now know what they are! Pretty much the same as mine wiring wise I would have thought.

Do they have 8 pins on the back?

Should have:

+
_

NO x2
NC x2
C x2

If so, it's a case of taking a pic of the switch wiring on the mk1 plugs so I can help you....

Thanks yeah that's the ones will get some photos up will find out how to do it .. absolutely hosin it down here but will do .. also became a subscriber for all the help and advice the site gives ...THANKS ...

If it becomes a struggle mate, you're more than welcome to visit Crieff at some point and we can spend the day getting them wired in.

These are the switches I used (day and night pics)

http://i242.photobucket.com/albums/f...d/IMG_0821.jpg

http://i242.photobucket.com/albums/f...d/IMG_1396.jpg

Been following your console build with envy .... I've started my console rebuild will hopefully put up photos when I'm finished .WHEN !!!!! :bow:

I'm planning soon to build a simplified 'plug'n'play' version of my console for sale. Standard mk2 switches etc but with android tablet entertainment system.

I want one.