theMGZS.co.uk  :: MG ZS forum

theMGZS.co.uk :: MG ZS forum (https://www.themgzs.co.uk/vb/index.php)
-   General Discussion (https://www.themgzs.co.uk/vb/forumdisplay.php?f=14)
-   -   Little Mods (https://www.themgzs.co.uk/vb/showthread.php?t=18065)

Blade9274 13-08-11 09:25 PM

Little Mods
 
Hello People.

Been a member for just over a week and i am loving the site. So much useful information on here :).

I am thinking of doing a couple of little mods, and was wondering what people's thoughts were.

1) De-Tangoing my headlights, and replacing with silvertech bulbs. (Maybe smoke them)
2) Buy and fit a Laguna Splitter.
3) Finally i am really not sure about this one, but was thinking of spraying the mesh Grills Black.

I look forward to hearing your thoughts :)

Thanks Graham

Supercharged_Z 13-08-11 09:41 PM

Hello Graham,

Welcome... nice to see a local member..

from experience you may just want to buy some rover 400 headlights as they are built with with no orange reflectors.

Laguna splitter is actually rarely done anymore but can look very good depending on the colour of your car

The grills spray black well, i had it done a while ago, but bewarned stone chips can make it messy.....

hope to see you around mate..

is your car a hatch? what colour is it?

Cheers
Ross

Blade9274 13-08-11 10:04 PM

Thanks for the Reply.

Its a MK1 Black, same as the one in the pic you have at the bottom of your posts. (Santa-Pod Pic)

Luckly i de-tangoed my old MK5 Fiesta Zetec-S, i have a heat gun and all the stuff to do a de-tango :)

The main reason for the splitter was that my car was black too :)

I will have a look around the site and try find a pic of someone else who has sprayed the Mesh.

I am just upset that when i meet you to get the Sheddist Kit from you it won't be in the ZS :( and will have to be in my Wifes Rover 214si.

All i will say about the Wifes car is its a 1997 214si, with wait for it........ 48000miles

Supercharged_Z 13-08-11 10:14 PM

thats some low miles?!!! why cant you bring the ZS out!?

the colour the the zs i had wasnt black it was somthing rare... black wheels looked good!

Blade9274 13-08-11 10:29 PM

The only thing going for the Wife Rover is the Mileage.

I have added an album to my profile, can you not see the pic of my car to the left of my posts??

The reason the ZS can't come is it looks like the Hydrulics have failed, only had them replaced in Oct last year.
I am hoping fitting the Sheddist Kit fixs the problem and i can return the stuff i brought and get a full refund...
If the Sheddist Kit doesn't fix the problem then the only other thing it can be is the clutch plate and release bearing :(

I am sure we will cross paths in the ZS's one day :)

If anyone else see's me i will wave back ;)

talkingcars 14-08-11 04:56 AM

Quote:

Originally Posted by Supercharged_Z (Post 218707)
..........from experience you may just want to buy some rover 400 headlights as they are built with with no orange reflectors..........

You need Rover 45 headlights, not 400.

Dan1971 14-08-11 06:12 AM

Mesh change .....

Mine wasn't quite black when I got it ....

http://i261.photobucket.com/albums/i.../NewZS2001.jpg


but one of the first things I did was get it back to standard ..... looked much better .... IMHO

http://i261.photobucket.com/albums/i...ex/MYMG001.jpg

Blade9274 14-08-11 07:53 AM

Hmmmmm, i like the mesh black but think you maybe right about it looking better Silver.

The front of that ZS has everything i was thinking of doing :)

Thanks Mate

Another thing that i have to do is replace the MG badge's they are so worn..
And best mod of all will be some site stickers ;)

Taphouse 14-08-11 08:03 AM

IMO it looked better with black grills.

I did all of the above little mods on a red mk1, and it made quite a difference. I de-oranged my ZS headlights, but it was quite a job, and you had to spray the orange silver, as its not an orange film like on fiesta. another top tip would be put the headlight unit in an oven for 5 mins on a low heat until golden brown! Only kidding just started to sound like i was on a cooking program! Leave in the oven on around 100c (reduce if using a fan assisted oven lol) for 5 minutes, and the lens will come away much easier than with a hot air gun.

:mml:

Blade9274 14-08-11 08:36 AM

Thanks for the reply,

So the orange is not just a plastic insert that you can remove??
That makes it much harder in my opinion, Maybe paying ?20.00 for some 45 lights is the way forward. Then sell my stardard lights to get the money back :) (FREE MOD :D)
I think i am going to give the black mesh a bash, if i dont get on with it its reversed easy enough..

Do you have to cut down a standard laguna splitter or are they a perfect fit?

Thanks


All times are GMT. The time now is 12:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk