Crank locking tool please...
 

I need to get my flywheel off and the TTV one on so need the locking tool which fits in the pulley.

Don't really want to buy a new one so if somebody has one they would lend me for a fee of course I would be very grateful.

Does the club have one I could rent? I've had the full kit before to do the belts but cant remember if the locking tool was there?

That is part of the kit I believe. However I made a flywheel locking tool using a section of an old flywheel ring gear and clamped this through one of the bell housing holes. I'm sure there's a photo in one of the threads showing this. I could send this, it'll be lighter to send than the crank tool.

I'd be more than happy to rent either from you as long as they will allow me to swop flywheels without damaging anything.

PM me if you like and I'll send some monies.

http://i98.photobucket.com/albums/l2...0/IMG_0668.jpg

Here's what I made from an old ring gear
http://i98.photobucket.com/albums/l2...0/IMG_0464.jpg