Project - Yellow Racing 180.
 

OK! so today was day one! and TBH I never done much..spent most of the day working on the garage. I left it to run to get up to temp make sure fans came on and off, and noticed I only have one fan that comes on and another that comes on when it can be arsed!..

also when its up to temp there does seem to be a small splutter or miss a little so defo one to look at, Ritchy did mention this so its not a total surprise.


The two weapons sitting back to back here.

http://i200.photobucket.com/albums/a...psdcfdd2d3.jpg


http://i200.photobucket.com/albums/a...ps99bb1e5b.jpg




as I said never done much but take a few basics off it -


Metal centre cap - Up for grabs if anyone is interested.

http://i200.photobucket.com/albums/a...ps381567d3.jpg


X-Power Door sills - again up for grabs
http://i200.photobucket.com/albums/a...psbf39a6e8.jpg

http://i200.photobucket.com/albums/a...ps8ef46835.jpg

but after that I was time to stop as tomorrow is collection of another track car... and had to get ready.

price for the sills bud

make me an offer bud, not wanting anything major for them, the two front ones fit into place but don't have the plastic insert bit, the rear ones are fully complete. all screw etc are there.

So it all begins :) I wish you all the best in the project and look forward to some updates.

Don't want to be a fud but we have rules with regards selling on here, something we put in-place to the protect the members and works well so far.

Well worth the £5 subscription mate, especially since you are going to be around for quite some time getting the project complete.

Sorry my bad! It's remembered for next time

When you start the car when cold switch the aircon off -
neither fans should come on -
turn on the aircon and one should come on -
do you have an obd2 reader such as a scangauge2,
if so plug it in for an acurate coolant temp and the other fan should come on at around 102'.

update for today:

spent the start of the day stripping out the garage to get the car into its new home,


http://i200.photobucket.com/albums/a...pse66849e7.jpg


once it had been in I set about stripping it as I'm still awaiting on a few parts to come.

http://i200.photobucket.com/albums/a...ps7f1a696a.jpg


http://i200.photobucket.com/albums/a...psbc82deb3.jpg

as with the interior, I'm going to punt it but plan on using the front two seats for just now until I get cheep buckets or replacements, do you's think its worth more keeping and sell as a full set or sell split?


http://i200.photobucket.com/albums/a...psf64f1823.jpg


still to remove door cards and deal with the front but getting there.

Also got a chance to jack it up have a play about and thinking its only needing new track rod ends and pads and disks. so happy there. thinking about either mintex grooved and dimpled with mintex pad to just get me going or EBC yellow stuff pads and similar disks.

Can get my hands on a set of 16" rover wheels which I might use instead of the 17" and maybe a set of 15" which is maybe what i'd use if possible.

You thinking of taking off the door cards?